thresholds (Junos OS)

Syntax

Hierarchy Level

Description

Specify thresholds used for the probes. A system log message is generated when the configured threshold is exceeded. Likewise, an SNMP trap (if configured) is generated when a threshold is exceeded.

Note:

If you configure a value of zero using the thresholds option for a certain probe parameter, the generation of SNMP traps is disabled for the corresponding probe attribute. For example, if you specify the set thresholds jitter-egress 0 statement, it denotes that traps are not triggered when the jitter in egress time threshold is met or exceeded.

Options

thresholds—Specify one or more threshold measurements. The following options are supported:

egress-time—Measures maximum source-to-destination time per probe.
ingress-time—Measures maximum destination-to-source time per probe.
jitter-egress—Measures maximum source-to-destination jitter per test.
jitter-ingress—Measures maximum destination-to- source jitter per test.
jitter-rtt—Measures maximum jitter per test, from 0 through 60,000,000 microseconds.
rtt—Measures maximum round-trip time per probe, in microseconds.
std-dev-egress—Measures maximum source-to-destination standard deviation per test.
std-dev-ingress—Measures maximum destination-to-source standard deviation per test.
std-dev-rtt—Measures maximum standard deviation per test, in microseconds.
successive-loss—Measures successive probe loss count, indicating probe failure.
total-loss—Measures total probe loss count indicating test failure, from 0 through 15. The default for this threshold is 1.

Required Privilege Level

system—To view this statement in the configuration.

system-control—To add this statement to the configuration.

Release Information

Statement introduced before Junos OS Release 7.4.

Support at the [edit services rpm twamp client control-connection control-client-name] hierarchy level introduced in Junos OS Release 15.1 for MX Series routers.

ON THIS PAGE