service-type
Syntax
service-type (elan | eline) ;
Hierarchy Level
[edit services rpm rfc2544-benchmarkingtests test-name test-name]
Description
Configure the service under test. Possible values are elan and
eline. This statement is applicable only for the
bridge
family, the
ethernet-switching family, or when the
mode is configured as reflect. When the service type is
elan, MAC addresses are swapped by default on the reflected
frames. The
no-mac-swap
option is not supported
for
this service type. When the service type is eline, MAC addresses
are not swapped by default in the reflected frames. Use the
mac-swap option to swap the addresses.
When you configure
Layer 2 reflection, you can specify the service type under test as
eline
if you want to simulate an
E-Line
service using bridge encapsulation.
Options
| elan | Specify the ELAN service type. |
| eline | Specify the E-Line service type. |
Required Privilege Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 12.3X53.
Statement introduced in Junos OS Evolved Release 22.4R1.