required-depth
Syntax
required-depth number;
Hierarchy Level
[edit interfaces interface-name atm-options mpls pop-all-labels], [edit interfaces interface-name fastether-options mpls pop-all-labels], [edit interfaces interface-name gigether-options mpls pop-all-labels], [edit interfaces interface-name sonet-options mpls pop-all-labels]
Description
For passive monitoring on ATM, SONET/SDH, Fast Ethernet, and Gigabit Ethernet
interfaces only, specify the number of MPLS labels an incoming packet must have for
the pop-all-labels statement to take effect.
For passive monitoring on
the MX304 router,
MX Series routers with MPCs,
and MX series
routers with the LC9600 line card, all labels are popped by
default and the required-depth statement is ignored.
If you include the required-depth 1 statement, the
pop-all-labels statement takes effect for incoming packets with
one label only. If you include the required-depth 2 statement, the
pop-all-labels statement takes effect for incoming packets with
two labels only.
Options
number—Number
of MPLS labels on incoming IP packets.
Range: 1 through 2 labels.
Default: If you omit this statement, the
pop-all-labelsstatement takes effect for incoming packets with one or two labels. The default is equivalent to including therequired-depth [ 1 2 ]statement.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.