Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

show services monitoring rpm history-results

Syntax

Description

Display the results stored for the specified real-time performance monitoring (RPM) probes.

Options

owner name

(Required) Display information for probes with the specified probe owner.

brief | detail

(Optional) Display the specified level of output.

  • Default: brief
since time

(Optional) Display information from the specified time. Specify time as yyyy-mm-dd.hh:mm:ss.
source-address address

(Optional) Display information only for probes with the specified source address.

target address

(Optional) Display information only for probes with the specified target address.

test name

(Optional) Display information only for the specified test.

Do not configure test if you configure any of the following options: source-addressor target. These options do not work when you configure test.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show services monitoring rpm history-results command. Output fields are listed in the approximate order in which they appear.

Table 1: show services monitoring rpm history-results Output Fields

Field Name

Field Description

Level of Output

Owner

Owner name. When you configure the probe owner statement at the [edit services monitoring rpm] hierarchy level, this field displays the configured owner name.

All levels

Test

Name of a test representing a collection of probes. When you configure the test name statement at the [edit services monitoring rpm owner] hierarchy level, the field displays the configured test name.

All levels

Probe sent

Timestamp when the probe was sent.

owner, brief

Probe received

Timestamp when the probe result was determined.

owner, brief

Round trip time

Average ping round-trip time (RTT), in microseconds.

owner, brief

Probe-type

Configured probe type for the test.

detail

Probe results

Result of a particular probe performed by a remote host, including whether a probe response was received. The following information is contained in the results:

  • Probe sent time—Timestamp for when the probe was sent.

  • Probe rcvd time—Timestamp for when the probe was sent, and whether offload timestamping is configured.

  • Rtt—Average ping round-trip time (RTT), in microseconds.

  • Rtt jitter—Difference, in microseconds, between the maximum and minimum RTT.

  • Egress jitter—For the probe type icmp-ping-timestamp, the egress delay measured for this probe, in microseconds.

  • Ingress jitter—For the probe type icmp-ping-timestamp, the ingress delay measured for this probe, in microseconds.

detail

Results over current test

Displays the results for the current test by probe at the time each probe was completed.

detail

Probes sent

Number of probes sent with the current test.

detail

Probes received

Number of probe responses received within the current test.

detail

Loss percentage

Percentage of lost probes for the current test.

detail

Measurement

Measurement for round trip time:

  • Samples—Number of samples.

  • Minimum—Minimum RTT measured over the course of the current test.

  • Maximum—Maximum RTT measured over the course of the current test.

  • Average—Average RTT measured over the course of the current test.

  • Stddev—Standard deviation of the round-trip time, in microseconds, measured over the course of the current test.

detail

Sample Output

show services monitoring rpm history-results owner

show services monitoring rpm history-results owner detail

Release Information

Command introduced in Junos OS Evolved Release 20.1R1.