Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


show services dynamic-flow-capture control-source



(M320 Series routers and T Series routers only) Display information about the control source that makes dynamic flow capture requests to the dynamic flow capture interface.


capture-group group-name

Capture group identifier.

source-identifier identifier

Control source identifier.

detail | terse

(Optional) Display the specified level of output.

Required Privilege Level


Output Fields

Table 1 lists the output fields for the show services dynamic-flow-capture control-source scommand. Output fields are listed in the approximate order in which they appear.

Table 1: show services dynamic-flow-capture control-source Output Fields

Output Field

Output Field Description

Capture group

Name of the capture group.

Control source

Name of the control source.

Criteria added, Criteria add failed

Number of criteria added or added and failed.

Active criteria

Number of active criteria.

Static criteria, Dynamic criteria

Number of static or dynamic criteria.

Control protocol requests

Total number of control protocol requests.


Number of Add, Delete, List, Refresh, and No-op control protocol requests.


Number of Add, Delete, List, Refresh, and No-op failed control protocol requests.

Add request rate

Rate of add requests.

Add request peak rate

Peak rate of add requests.

Bandwidth across all criteria

Bandwidth used by all the requests.

Total notifications

Total number of notifications sent and the number of notifications by category: Restart, Rollover, Timeout, Congestion, Congestion delete, and Dups (duplicates) dropped.

Criteria deleted

Total number of criteria deleted and the number of deleted criteria by category: Timeout idle, Timeout total, Packets, and Bytes.

Sequence number

Sequence number.

Sample Output

show services dynamic-flow-capture control-source source-identifier capture-group

show services dynamic-flow-capture control-source ource-identifier capture-group detail

Release Information

Command introduced in Junos OS Release 7.4.