show ethernet-switching vxlan-tunnel-end-point source

Syntax

Description

Display information about source VXLAN tunnel endpoints (VTEPs), including source VTEP IP address, interface, mode, and any associated egress link protection (ELP) reroute tunnel, bridge domains (VLANs), and translated VNI information for data center interconnect (DCI) (if applicable).

Required Privilege Level

admin

Output Fields

Table 1: show ethernet-switching vxlan-tunnel-end-point source Output Fields

Field Name	Field Description
Logical System Name	Name of the logical system on which you have configured the related MAC-VRF routing instance or other EVPN instance type.
Id	Logical system ID
L2-RTT	Layer 2 routing instance name
SVTEP-IP	IP address of the source VTEP
IFL	Logical interface name
L3-Idx	System index number of the associated Layer 3 interface
SVTEP-Mode	Source VTEP mode
ELP-SVTEP-IP	IP address of an associated ELP tunnel for the source VTEP
L2-RTT	Layer 2 routing instance name
Bridge Domain	Associated bridge domains (VLANs)
VNID	VLAN network ID. This is the original VNID in the data center
Translation-VNID	Translation VLAN network ID. This is the translated VNID that is being used in the packet as it exits the data center.
MC-Group-IP	Multicast group IP address

Sample Output

Release Information

Command introduced in Junos OS Release 21.3R1.