Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show ethernet-switching mac-ip-table

Syntax

Description

Displays the MAC-IP address for all IPv4 (ARP) and IPv6 (ND) bindings for VLANs in routing instances where the instance-type is ethernet-switching.

Options

brief | detail |extensive | summary

(Optional) Display the specified level of output.

instance instance-name

(Optional) Display the MAC-IP address information for the specified routing instance.

kernel

(Optional) Display the MAC-IP address entries in the kernel

vlan-name (all | vlan-name)

(Optional) Display the MAC-IP address entries for all VLANs or for a specified VLAN.

Required Privilege Level

maintenance

Output Fields

Table 1 lists the output fields for the show ethernet-switching mac-ip-table command. Output fields are listed in the approximate order in which they appear.

Table 1: show ethernet-switching mac-ip-table Output Fields

Field Name

Field Description

Level of Output

IP address

IP address associated with the ethernet switching instance type.

All levels

MAC address

MAC address

All levels

Flags

MAC IP flags: Identifies : statically installed MAC-IP entries.

  • S—Statically installed MAC-IP entries.

  • D—Dynamic installed MAC-IP address entries.

  • L—Locally learned MAC-IP address entries

  • R— MAC-IP address entries that are learnt from a remote device via the control plane.

  • Lp—Local proxy MAC IP address entries.

    In multihoming networks, a device that learns of a MAC address as a DLR (local and remote) and also learns the MAC-IP address binding remotely will send a MAC-IP address notification message (as if it was generated by traffic). This entry is identified as a local proxy address. The remote multihomed peer identifies the corresponding MAC-IP entry as remote proxy address.

  • Rp—Remote proxy MAC IP address entries. See Lp flag for more information

  • K—MAC-IP address entries that are installed in the kernel.

  • RT—Destination Route that corresponds to an installed entry.

  • AD—Advertised to remote device.

  • NAD—MAC-IP address entries on disabled IRB interfaces. These entries are not advertised.

  • RE—Specifies temporary ARP/ND entries while the device is waiting for a response from an arp or network solicitation request. The entries are removed after three unsuccessful request attempts.

  • RO—Router. This applies only to IPv6 MAC-IP addresses. Refer to RFC 4861 for more information on the Router flag.

  • OV—Override.This applies only to IPv6 MAC-IP addresses. Refer to RFC 4861 for more information on the Override flag.

  • UR—Unresolved MAC-IP address entries. This flag is specific to the Junos EVO environment
  • RTS—Device skipped adding an EVPN Type 2 route in favor of an EVPN Type 5 route with a matching prefix (extensive output displays dest_route_skipped).

Brief, detail

GBP Tag

Assigned Group Based Policy (GBP) from 1 through 65535.

All levels

Logical Interface

The logical interface associated with the routing instance.

Brief, detail

Active Source

The source of the learned MAC-IP address entry. Displays the ESI or router ID.

All levels

Routing Instance

Information on the Routing instance where the MAC-IP address entry was learned.

  • Bridging domain

  • MAC-IP local mask

  • MAC-IP remote mask

  • MAC-IP RPD flags

  • MAC-IP flags

Extensive

BD ID

Bridge Domain ID

Brief

Sample Output

show ethernet-switching mac-ip-table

show ethernet-switching mac-ip-table

show ethernet-switching mac-ip-table extensive

show ethernet-switching mac-ip-table kernel

show ethernet-switching mac-ip-table vlan-name v1 (with EVPN Type 2 and EVPN Type 5 route coexistence)

show ethernet-switching mac-ip-table extensive (with EVPN Type 2 and EVPN Type 5 route coexistence)

Release Information

Command introduced in Junos OS Release 17.4R2.

GBP Tag option introduced in Junos OS Release 22.4R1.