address-assignment (Address-Assignment Pools)
Syntax
address-assignment {
abated-utilization percentage;
abated-utilization-v6 percentage;
high-utilization percentage;
high-utilization-v6 percentage;
neighbor-discovery-router-advertisement ndra-pool-name;
pool pool-name {
active-drain;
family family {
dhcp-attributes {
protocol-specific attributes;
}
excluded-address ip-address;
excluded-range name low minimum-value high maximum-value;
host hostname {
hardware-address mac-address;
ip-address ip-address;
}
network ip-prefix/<prefix-length>;
prefix ipv6-prefix;
range range-name {
high upper-limit;
low lower-limit;
prefix-length prefix-length;
}
}
hold-down;
link pool-name;
}
}
Hierarchy Level
[edit access]
Description
Configure address-assignment pools that can be used by different client applications.
Support for subordinate statements is platform-specific. See individual statement topics for support information.
Options
| abated-utilization | (ACX Series, MX Series only) Starting in Junos OS Release 11.2, generate SNMP traps for DHCP address pools or linked set of address pools. No SNMP traps are generated unless a value is configured. Default: Abated utilization is not set. Delete the abated-utilization value to unset.
|
| abated-utilization-v6 | (ACX Series, MX Series only) Starting in Junos OS Release 11.2, generate SNMP traps for DHCPv6 address pools or linked set of address pools. No SNMP traps are generated unless a value is configured. Default: Abated utilization is not set. Delete the abated-utilization value to unset.
|
| high-utilization | (ACX Series, MX Series only) Starting in Junos OS Release 11.2, generate an SNMP trap when the DHCP address pool or linked set of address pools use surpasses the specified percentage. Default: High utilization is not set. Delete the high-utilization value to unset.
|
| high-utilization-v6 | (ACX Series, MX Series only) Starting in Junos OS Release 11.2, generate an SNMP trap when the DHCPv6 address pool or linked set of address pools use surpasses the specified percentage. Default: High utilization is not set. Delete the high-utilization value to unset.
|
| neighbor-discovery-router-advertisement | (M Series, MX Series, SRX Series, T Series only) Configure the name of the address-assignment pool used to assign the router advertisement prefix.
|
The remaining statements are explained separately. Search for a statement in CLI Explorer or click a linked statement in the Syntax section for details.
Required Privilege Level
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 9.0.