queue-threshold

Syntax

Hierarchy Level

Description

Enable monitoring of fabric and WAN queues.

When the fabric-queue statement is configured, an SNMP trap is generated when the fabric queue depth exceeds the configured threshold value.

When wan-queue is configured, an SNMP trap is generated whenever the WAN queue depth exceeds the configured threshold value.

By default, monitoring of fabric queue and WAN queue is disabled.

Options

fabric-queue

Configure threshold values to monitor fabric queue depth. An SNMP trap is generated when fabric queue depth exceeds the configured threshold value. When this option is configured, you can use the show class-of-service fabric statistics detail command or the show pfe statistics traffic detail command to display detailed statistics at the level of the Packet Forwarding Engine.

priority priority—Specify the queue priority for fabric queues. The options are high and low. Traffic with low priority is sent after any queue that has a high priority. The priorities map to numeric priorities in the underlying hardware.
threshold threshold-percentage—Configured threshold value for the priority level for fabric queues. An SNMP trap is generated when the actual queue utilization percentage exceeds the configured threshold value.

wan-queue

Configure threshold values to monitor the WAN queue depth. An SNMP trap is generated when the WAN queue depth exceeds the configured value.

priority priority—Specify the queue priority for WAN queues. The priority level can be high, medium-high, medium-low, and low.
threshold threshold-percentage—Configured threshold value for the priority level for WAN queues. An SNMP trap is generated when the actual queue utilization percentage exceeds the configured threshold value.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 15.1.

ON THIS PAGE