output-traffic-control-profile-remaining
Syntax
output-traffic-control-profile-remaining profile-name;
Hierarchy Level
[edit class-of-service interfaces interface-name], [edit class-of-service interfaces interface-name interface-set interface-set-name]
Description
Apply the specified traffic control profile (traffic scheduling and shaping configuration objects) to the remaining output traffic at the physical interface or interface set. The remaining traffic is transmitted by the default interface or interface set.
This statement is supported on the following interfaces:
IQ2E PIC interfaces on M Series and T Series routers
Enhanced Queuing DPC, MICs, and MPC interfaces on MX Series routers
GRE tunnel interfaces configured on physical interfaces hosted on MIC or MPC line cards in MX Series routers.
Note:Interface sets (sets of interfaces used to configure hierarchical CoS schedulers on supported Ethernet interfaces) are not supported on GRE tunnel interfaces.
You can map the TCP to the interface or interface set by using
the output-traffic-control-profile-remaining statement
to explicitly configure the queues of the default interface or interface
set scheduler that transmits the remaining traffic.
Options
profile-name—Name of the traffic-control profile for remaining traffic
to be applied to this interface or interface set.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 8.5.
Support on GRE tunnel interfaces configured on physical interfaces on MICs or MPCs in MX Series routers added in Junos OS Release 13.3.