Example: Configuring IEEE 802.1p BA Classifier on 10-Gigabit Ethernet LAN/WAN PICs
To configure an IEEE 802.1p behavior aggregate (BA) classifier
on the 10-Gigabit Ethernet LAN/WAN PICs, include the following statements
at the [edit class-of-service] hierarchy level:
[edit class-of-service classifiers]
ieee-802.1 classifier-name {
forwarding-class fc-nc2 {
loss-priority low code-points [111];
}
forwarding-class fc-nc1 {
loss-priority low code-points [110];
}
forwarding-class fc-af12 {
loss-priority low code-points [101];
}
forwarding-class fc-af11 {
loss-priority low code-points [100];
}
forwarding-class fc-ef1 {
loss-priority low code-points [011];
}
forwarding-class fc-ef {
loss-priority low code-points [010];
}
forwarding-class fc-be1 {
loss-priority low code-points [001];
}
forwarding-class fc-be {
loss-priority low code-points [000];
}
}
[edit class-of-service interfaces xe-0/1/2 unit 0]
classifiers {
ieee-802.1 classifier-name;
}
Note:
The 10-Gigabit Ethernet LAN/WAN PICs do not support queuing at the logical interface level. However, classifiers can be configured on individual logical interfaces. The same classifier can be configured on multiple logical interfaces.