Understanding CoS CLI Configuration Statements on ACX Series Routers
ACX Series Universal Metro Routers have some statements or statement options supported on other platforms that are not supported or may not have effect on ACX Series devices.
The following CLI options are not applicable to ACX Series Universal Metro Routers:
[edit class-of-service schedulers scheduler-name priority-level] low; medium-low; medium-high; high;
Configure the strict-high-priority queue with unlimited transmission bandwidth so that all traffic receives precedence over any non strict-high priority queues.
At the [edit class-of-service classifiers type
classifier-name] hierarchy level, the dscp-ipv6 and ieee-802.1ad classifier types are not supported.
For the dscp classifier type, only the outer tag is supported.
The following CLI stanza is not applicable to ACX Series Universal Metro Routers.
[edit class-of-service interfaces interface-name] irb { unit logical-unit-number { classifiers { type (classifier-name | default); } rewrite-rules { dscp (rewrite-name | default); dscp-ipv6 (rewrite-name | default); exp (rewrite-name | default) protocol protocol-types; ieee-802.1 (rewrite-name | default) vlan-tag (outer | outer-and-inner); inet-precedence (rewrite-name | default); } } }
The following CLI statements are not applicable to ACX Series Universal Metro Routers.
[edit class-of-service routing-instances routing-instance-name]
[edit class-of-service scheduler-map-chassis map-name]
[edit class-of-service interfaces interface-name unit logical-unit-number] input-shaping-rate (percent percentage | rate); input-traffic-control-profile profiler-name shared-instance instance-name; output-traffic-control-profile profile-name shared-instance instance-name; per-session-scheduler; scheduler-map map-name; shaping-rate rate;
[edit class-of-service interfaces iinterface-name unit logical-unit-number] classifiers { type (classifier-name | default); } rewrite-rules { dscp (rewrite-name | default); dscp-ipv6 (rewrite-name | default); exp (rewrite-name | default) protocol protocol-types; exp-push-push-push default; exp-swap-push-push default; ieee-802.1 (rewrite-name | default) vlan-tag (outer | outer-and-inner); inet-precedence (rewrite-name | default); }
In the above stanza, [edit class-of-service interface-name unit logical-unit-number rewrite-rule exp (rewrite-name | default)] is supported. However, edit [class-of-service interface-name unit logical-unit-number rewrite-rule exp protocol protocol type] is not supported.
[edit class-of-service interfaces interface-name interface-set interface-set-name] excess-bandwidth-share; internal-node; output-traffic-control-profile profile-name; output-traffic-control-profile-remaining profile-name;