input-traffic-control-profile
Syntax
input-traffic-control-profile profile-name shared-instance instance-name;
Hierarchy Level
[edit class-of-service interfaces interface-name], [edit class-of-service interfaces interface-name unit logical-unit-number]
Description
For Gigabit Ethernet IQ2 and IQ2E PIC, Enhanced
Queuing DPC , MIC, and MPC interfaces, apply an input traffic scheduling
and shaping profile to the logical interface. The input-traffic-control-profile and input-scheduler-map statements are mutually exclusive
at the same hierarchy level.
The shared-instance statement applies only
to Gigabit Ethernet IQ2 and IQ2E PICs.
For an Enhanced Queuing (EQ) DPC on an MX Series router,
CoS queuing and scheduling are enabled on the egress side but disabled
on the ingress side by default. To enable ingress CoS on the EQ DPC,
you must configure the traffic-manager statement with ingress-and-egress mode:
[edit chassis fpc slot-number pic pic-number] traffic-manager mode ingress-and-egress;
Options
profile-name—Name of the traffic-control profile to be applied to this
interface.
instance-name—Name of
the shared scheduler and shaper to be applied to this interface.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 7.6.