classifiers (Interfaces)
Syntax
classifiers {
type (classifier-name | default) family (mpls | inet);
no-default;
}
Hierarchy Level
[edit class-of-service interfaces interface-name ]
[edit class-of-service interfaces interface-name unit logical-unit-number]
Description
Apply a CoS aggregate behavior classifier to a logical or physical interface. You can apply a default classifier or one that is previously defined.
On MX Series routers, you must apply the classifier to a logical interface.
On ACX Series routers, you must apply the classifier to a physical interface.
If you do not explicitly apply a classifier configuration to the interface, the
default classifier is applied to the interface. Apply the
no-default option to disable the application of any default
classifier to the routing instance.
On supported devices, you can apply the no-default option to a
flexible tunnel interface (ftin) to enable
the device to classify traffic exiting the tunnel based on the classifier
assigned to the underlay (ingress) interface of the tunnel's egress device.
Options
classifier-name |
Name of the aggregate behavior classifier. |
type |
Traffic type.
Note:
You can only specify a family for the |
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.
no-default option added in Junos OS Release 16.1.