Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Configuring the Layer 2 CPE When Running MX Series Router Cloud CPE Ethernet OAM for VRRP Services

Note:

This procedure uses a Juniper Networks EX Series Ethernet Switch for the Layer 2 CPE.

To configure the Layer 2 CPE requirements:

  1. Configure the Ethernet interfaces and VLAN.
    1. Configure the Ethernet interfaces.

    2. Configure the VLAN.

  2. Configure the maintenance domain, maintenance association, and MEP.
    1. Create the maintenance domain.

    2. Create the maintenance association and configure the continuity check.

    3. Create local the MEP and assign the interface to it.