Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Configuring a VRRP IPv4 Group for MX Series Router Cloud CPE Services

To configure a VRRP group for cCPE services, complete the following tasks on the cCPE IRB interface defined for the subscriber:

  1. Specify the VRRP group.
  2. Specify the address of the virtual router in the IPv4 VRRP group.
  3. Configure the VRRP router’s priority for becoming the primary default router.
  4. Enable the primary VRRP virtual router to accept all packets destined for the virtual IP address.
  5. Configure the authentication scheme for the VRRP group to use simple password authentication.
  6. Configure the VRRP authentication key.
  7. Verify the configuration.