Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Configuring the Layer 2 CPE for MX Series Router Cloud CPE Multiple Ethernet Interface Services

Note:

This procedure uses a Juniper Networks EX Series Ethernet Switch for the Layer 2 CPE. For complete details on EX Series Ethernet switches see, EX Series Ethernet Switches

To configure the Layer 2 CPE for multiple Ethernet interfaces support:

  1. Configure the first Ethernet interface on the CPE.
  2. Configure the second Ethernet interface.
  3. Configure the WAN link for trunk mode.
  4. Configure the VLAN for the first department; for example, Sales.
    1. Specify the VLAN name.

    2. Specify the VLAN ID.

    3. Specify the interface associated with the VLAN.

    4. Specify the trunk port interface associated with the VLAN.

  5. Configure the VLAN for the second department; for example, Engineering.
    1. Specify the VLAN name.

    2. Specify the VLAN ID.

    3. Specify the interface associated with the VLAN.

    4. Specify the trunk port interface associated with the VLAN.