tracing
Syntax
tracing {
destination-override syslog host ip-address;
}
Hierarchy Level
[edit system]
Description
Enabling tracing can adversely impact scale and performance and may increase security risk. We strongly recommend using the trace, tracing, or traceoptions commands only under the guidance of a JTAC support engineer. After collecting the debug information, immediately disable tracing to minimize risk and restore normal system performance.
Configure the router to enable remote tracing to a specified host IP address. The default setting is disabled.
The following processes are supported:
chassisd—Chassis-control process
eventd—Event-processing process
cosd—Class-of-service process
spd—Adaptive-services process
You can use the no-remote-trace statement, under
the [edit system process-name traceoptions] hierarchy,
to disable remote tracing.
Options
destination-override syslog host ip-address—Overrides the global config under system tracing and has no effect if system tracing is not configured.
Required Privilege Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 9.2.