Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

traceoptions (Juniper Secure Connect)

Syntax

Hierarchy Level

Description

CAUTION:

Enabling tracing can adversely impact scale and performance and may increase security risk. We strongly recommend using the trace, tracing, or traceoptions commands only under the guidance of a JTAC support engineer. After collecting the debug information, immediately disable tracing to minimize risk and restore normal system performance.

Configure remote access tracing operations for Juniper Secure Connect. By default, messages are written to /var/log/file-name file. The default file name if not configured is ravpn_trace.

Options

filename

Name of file in which to write trace information.
files

Maximum number of trace files.

  • Default: 3

  • Range: 2 through 1000
match

Regular expression for lines to be logged.
no-world-readable

Don't allow any user to read the log file.
size

Maximum trace file size.

  • Default: 128k

  • Range: 10 KB through the maximum file size supported on your system.

world-readable

Allow any user to read the log file.
flag flag—Tracing operation to perform

Tracing operation to perform.

  • Values:

    • all—Trace everything

    • cli-configuration—Trace CLI configuration events
level level

Tracing level. The following values are supported:

  • brief—Brief debugging output

  • detail—Detailed debugging output

  • extensive—Extensive debugging output

  • verbose—Verbose debugging output
no-remote-trace

Disable remote tracing.

Required Privilege Level

trace

Release Information

Statement introduced in Junos OS Release 20.3R1.

Related Documentation