Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

rsvp

Syntax

Hierarchy Level

Description

RSVP options

Options

associated-bidirectional-lsp

Set associated bidirectional LSP attributes

  • single-sided-provisioning—Enable unidirectional reverse LSP setup for single sided provisioned forward LSP

authentication-key

Authentication password

cross-credibility-cspf

Compute CSPF paths spanning protocols for bypass LSP, detour LSP and loose hop expansion

enable-disable

  • disable—Disable RSVP

  • enable—Enable RSVP

expand-flood-reflector-hop

Control expansion of flood reflector ERO strict hops

graceful-deletion-timeout

Time to complete graceful deletion signaling (seconds)

  • Default: 30

  • Range: 1 through 300

hello-acknowledgements

Acknowledge Hellos on RSVP interfaces not having sessions

keep-multiplier

Keep multiplier

  • Default: 3

  • Range: 1 through 255

load-balance

Per-packet load-balancing algorithm

  • bandwidth—Per-packet load balancing proportional to LSP bandwidth

local-reversion

Enable local reversion at this Point of Local Repair

no-authentication-check

Skip authentication check for received messages

no-enhanced-frr-bypass

Disable enhanced facility backup FRR

no-hello-acknowledgements

Do not ack Hellos on RSVP interfaces not having sessions

no-interface-hello

Disble interface Hellos on all RSVP interfaces

no-local-reversion

Disable local reversion at this Point of Local Repair

no-node-hello

Disable node-ID based Hellos on the router

no-node-hello-on-bypass

Do not send NodeID hello over bypass LSP

no-node-id-subobject

Do not include the node-id sub-object in the RRO

no-p2mp-re-merge

Enable p2mp remerge

no-p2mp-sublsp

Disable P2MP sub-LSP object generation

refresh-time

Refresh time in seconds

  • Default: 1200

  • Range: 1 through 65535

rfc6510-lsp-attributes

Use RFC6510 compliant LSP_ATTRIBUTES

setup-protection

Enable setup protection

The remaining statements are explained separately. See CLI Explorer.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

Release Information