peak-information-rate (QFX)
Syntax
peak-information-rate bits-per-second;
Hierarchy Level
[edit firewall three-color-policer policer-name two-rate]
Description
Configure the maximum achievable rate. Packets that exceed the committed information rate (CIR) but are below the peak information rate (PIR) are marked with medium-high packet loss priority (yellow). Packets that exceed the PIR are marked with high packet loss priority (red). You can configure a discard action for packets that exceed the PIR.
When you include the peak-information-rate
statement in the configuration,
you must also include the committed-information-rate and peak-burst-size
statements at the same hierarchy level.
Options
bits-per-second—Number of bits per second. You can specify a value in bits per second either as a complete decimal number or as a decimal number followed by the abbreviation k (1000), m (1,000,000), or g (1,000,000,000).
Range: 32,000 bps through 10,000,000,000 bps (10 gbps)
Required Privilege Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 11.1.