no-remove-srv6-last-sid
Syntax
no-remove-srv6-last-sid;Hierarchy Level
[edit logical-systems name protocols source-packet-routing],
[edit protocols source-packet-routing],
[edit protocols source-packet-routing segment-list name],
[edit protocols source-packet-routing source-routing-path-template template-name],
[edit protocols source-packet-routing source-routing-path tunnel name]
Description
Do not remove the last SID for SRv6-TE ingress routes.
In older Junos releases, the last SID of the SRv6 TE tunnel was replaced with the service SID to avoid double termination at the egress node. The last SID of the SRv6-TE tunnel is ideally the Node SID of the egress Node. But in a deployment where the transit prefix without service SID resolves over a SRv6 TE tunnel the last SID must be retained, so that the ingress SRv6 TE tunnel acts as a transit tunnel to forward transit traffic with SRv6 encapsulation.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 25.4R1.