msdp
Syntax
msdp {
disable;
active-source-limit {
log-interval seconds;
log-warning value;
maximum number;
threshold number;
}
data-encapsulation (disable | enable);
export [ policy-names ];
group group-name {
... group-configuration ...
}
hold-time seconds;
import [ policy-names ];
local-address address;
keep-alive seconds;
peer address {
... peer-configuration ...
}
rib-group group-name;
source ip-prefix</prefix-length> {
active-source-limit {
maximum number;
threshold number;
}
}
sa-hold-time seconds;
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
}
group group-name {
disable;
export [ policy-names ];
import [ policy-names ];
local-address address;
mode (mesh-group | standard);
peer address {
... same statements as at the [edit protocols msdp peer address] hierarchy level shown just following ...
}
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
}
}
peer address {
disable;
active-source-limit {
maximum number;
threshold number;
}
authentication-key peer-key;
default-peer;
export [ policy-names ];
import [ policy-names ];
local-address address;
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
}
}
}
Hierarchy Level
[edit logical-systems logical-system-name protocols], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols], [edit protocols], [edit routing-instances routing-instance-name protocols]
Description
CAUTION:
Enabling tracing can adversely impact scale and performance and may increase security risk. We strongly recommend using the trace, tracing, or traceoptions commands only under the guidance of a JTAC support engineer. After collecting the debug information, immediately disable tracing to minimize risk and restore normal system performance.
Enable MSDP on the router or switch. You must also configure at least one peer for MSDP to function.
Default
MSDP is disabled on the router or switch.
Options
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.