measurement-interval
Syntax
measurement-interval (5|15|30|60)
Hierarchy Level
[edit protocols oam ethernet connectivity-fault-management
performance-monitoring]
[edit protocols oam ethernet connectivity-fault-management performance-monitoring
sla-iterator-profiles profile-name]
Description
Configure measurement interval to be used for a
performance monitoring session. You must configure the measurement-interval
at the [edit protocols oam ethernet cfm performance-monitoring] hierarchy level, which is a global level parameter. You can override
the configured value by specifying a measurement-interval for the
iterator profile at the [edit protocols oam ethernet cfm performance-monitoring
sla-taerator-profiles profile-name] hierarchy
level.
When you configure when MEF-36-compliant performance monitoring, you must also
configure an enhanced-sla-iterator at the [edit
protocols oam ethernet connectivity-fault-management
performance-monitoring] hierarchy level.
On ACX7000 Series and PTX Series of routers, where Y.1731 iterators are
supported, you must configure the measurement-interval
statement at the [edit protocols oam ethernet
connectivity-fault-management performance-monitoring] hierarchy
level for the functioning of the iterators.
Default
15 minutes
Required Privilege Level
configure—To enter configuration mode.
control—To modify any configuration.