leave-timer (MVRP)
Syntax
leave-timer milliseconds;
Hierarchy Level (EX Series, QFX Series, QFabric)
[edit protocols mvrp interface (all | interface-name)]
Hierarchy Level (M Series, SRX Series, MX Series, T Series)
[edit logical-systems logical-system-name protocols mvrp], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols mvrp interface (all | interface-name)], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols mvrp], [edit logical-systems logical-system-name protocols mvrp interface (all | interface-name)], [edit protocols mvrp interface (all | interface-name)], [edit routing-instances routing-instance-name protocols mvrp], [edit routing-instances routing-instance-name protocols mvrp interface (all | interface-name)]
Description
For Multiple VLAN Registration Protocol (MVRP), configure the number of milliseconds the switch retains a VLAN in the Leave state before the VLAN is unregistered. If the interface receives a join message before this timer expires, the VLAN remains registered.
Maintain default timer settings unless there is a compelling reason to change the settings. Modifying timers to inappropriate values might cause an imbalance in the operation of MVRP.
Default
1000 milliseconds
Options
milliseconds—Interval that the switch retains a VLAN in the Leave state
before the VLAN is unregistered. At a minimum, set the leave-timer interval at twice the join-timer interval (range from 300 milliseconds
through 1000 milliseconds). Maintain default timer settings unless
there is a compelling reason to change the settings. Modifying timers
to inappropriate values might cause an imbalance in the operation
of MVRP.
Required Privilege Level
routing—To view this statement in the configuration.routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 10.0.