ila-options

Syntax

Hierarchy Level

Description

Configure the optical ILA IP address for optical supervisory channel communications across the amplifier chain and threshold crossing alerts for the optical ILA performance monitors.

Note:

To configure any other optical ILA options, you must log in to the optical ILA CLI, see Optical Inline Amplifier Hardware Guide.

You configure and manage optical ILAs through the associated anchor IPLC module in the PTX3000 integrated photonic line system. All communication to the optical ILA is through the anchor IPLC.

Default

Options

ila-ipv4-address ila-ipv4-address

Specify the IPv4 address of the optical ILA in the format: w.x.y.z/a. To enable OSC communication to and from the specified optical ILA, you must configure the IP address of the optical ILA.

Tip:

All communication to and from an optical ILA is through the anchor IPLC in the PTX3000 integrated photonic line system, therefore when you set the IP address of an optical ILA, you must also specify the FPC slot in which the anchor IPLC resides. In addition, be sure to specify an IP address on the same subnet as the anchor IPLC.

Note:

All IP addresses associated with the OSC in the optical amplifier chain must be on the same subnet.

tca-xxx-xxx.......—Specify the threshold crossing alerts values for the optical ILA EDFAs, OSC, and VOAs. Table 1, Table 2, and Table 3describe the TCAs you can configure for the optical ILA.

Table 1: Optical ILA EDFA Threshold Crossing Alerts
EDFA Threshold Crossing Alerts
Threshold Crossing Alert Name	Description
tca-input-power-high	Input Power high TCA
tca-input-power-low	Input Power low TCA
tca-output-power-high	Output Power high TCA
tca-output-power-low	Output Power low TCA
tca-pump0-current-high	Pump0 current high TCA
tca-pump0-current-low	Pump0 current low TCA
tca-pump0-temperature-high	Pump0 temperature high TCA
tca-pump0-temperature-low	Pump0 temperature low TCA
tca-pump1-current-high	Pump1 current high TCA
tca-pump1-current-low	Pump1 current low TCA
tca-pump1-temperature-high	Pump1 temperature high TCA
tca-pump1-temperature-low	Pump1 temperature low TCA
tca-signal-output-power-high	Signal output Power high TCA
tca-signal-output-power-low	Signal output Power low TCA

Table 2 describes the TCAs you can configure for the optical ILA OSC TCAs:

Table 2: Optical ILA OSC Threshold Crossing Alert
Optical Supervisory Channel TCAs
Threshold Crossing Alert Name	Description
osc-fiber-loss-high-tca	OSC fiber loss high TCA
osc-fiber-loss-low-tca	OSC fiber loss low TCA
osc-rx-power-high-tca	OSC RX power high TCA
osc-rx-power-low-tca	OSC RX power low TCA
osc-tx-power-high-tca	OSC TX power high TCA
osc-tx-power-low-tca	OSC TX power low TCA

Table 3 describes the TCAs you can configure for the optical ILA VOA TCAs:

Table 3: Optical ILA VOA Threshold Crossing Alerts
VOA TCAs
Threshold Crossing Alert Name	Description
tca-attenuation-high	Attenuation high TCA
tca-attenuation-low	Attenuation low TCA

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.

Release Information

Statement introduced in Junos OS Release 17.1R1.