iccp
Syntax
iccp {
authentication-key string;
local-ip-addr local-ip-addr;
peer ip-address{
authentication-key string;
backup-liveness-detection {
backup-peer-ip ip-address;
}
liveness-detection {
detection-time {
threshold milliseconds;
}
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
multiplier number;
no-adaptation;
transmit-interval {
minimum-interval milliseconds;
threshold milliseconds;
}
version (1 | automatic);
}
local-ip-addr ipv4-address;
session-establishment-hold-time seconds;
}
session-establishment-hold-time seconds;
traceoptions {
file <filename> <files number> <match regular-expression> <microsecond-stamp> <size size> <world-readable | no-world-readable>;
flag flag;
no-remote-trace;
}
}
Hierarchy Level
[edit protocols]
Description
Enabling tracing can adversely impact scale and performance and may increase security risk. We strongly recommend using the trace, tracing, or traceoptions commands only under the guidance of a JTAC support engineer. After collecting the debug information, immediately disable tracing to minimize risk and restore normal system performance.
Configure Inter-Chassis Control Protocol (ICCP) between the multichassis link aggregation group (MC-LAG) peers. ICCP replicates forwarding information, validates configurations, and propagates the operational state of the MC-LAG members.
Backup liveness detection is not supported on MX Series routers.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 10.0.