resource-list (Telemetry)
Syntax
resource-list {ecmp-group-table | ecmp-member-table | efp | egress-l3-interface | host-ipv4 | host-ipv6 | ifp | l3-next-hop | lpm-table-ipv4 | lpm-table-ipv6-128 | lpm-table-ipv6-64 | mpls-ingress-table | mpls-table-swap | tunnel-table | vfp | vport}
Hierarchy Level
[edit forwarding-options pfe-sensor npu-memory], [edit logical-systems name routing-instances name forwarding-options pfe-sensor npu-memory], [edit logical-systems name tenants name routing-instances name forwarding-options pfe-sensor npu-memory], [edit routing-instances name forwarding-options pfe-sensor npu-memory], [edit tenants name routing-instances name forwarding-options pfe-sensor npu-memory]
Description
Specify a list of resources to monitor and export for Packet Forwarding Engine sensors.
If you do not include the resource-list statement, information for all
active groups in the system is exported. To see a list of groups, use the show
pfe filter hw summary command.
Export group information to a collector by including the resource path /junos/system/linecard/npu/memory in a subscription.
Options
| ecmp-group-table |
Retrieve equal-cost multipath (ECMP) group table information. |
| ecmp-member-table |
Retrieve ECMP member table information. |
| efp |
Retrieve egress filter information. |
| egress-l3-interface |
Retrieve egress Layer 3 (L3 interface information. |
| host-ipv4 |
Retrieve IPv4 host information. |
| host-ipv6 |
Retrieve IPv6 host information. |
| ifp |
Retrieve ingress filter information. |
| l3-next-hop |
Retrieve L3 next hop information. |
| lpm-table-ipv4 |
Retrieve longest prefix match (LPM ) IPv4 table information. |
| lpm-table-ipv6-128 |
Retrive LPM IPv6 table information for /128 prefix routes. |
| lpm-table-ipv6-64 |
Retrieve LPM IPv6 table information for /64 prefix routes. |
| mpls-ingress-table |
Retrieve MPLS ingress table information |
| mpls-swap-table |
Retrieve MPLS swap table information. |
| tunnel-table |
Retrieve MPLS/LP tunnel table information. |
| vfp |
Retrieve VLAN filter information. |
| vport |
Retrieve Virtual Chassis port (VCP) information. |
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 23.4R1.