vxlan-gbp-l3-profile
Syntax
vxlan-gbp-l3-profile;
Hierarchy Level
[edit chassis forwarding-options]
Description
Enable vxlan-gbp-l3-profile on the tunnel termination endpoint in your
EVPN-VXLAN deployment to support group-based policies. This setting tells the switch to
allocate a share of its resources for L2/L3 group-based policies, whereas otherwise the
resources would remain committed for use by all other flows.
The vxlan-gbp-l3-profile profile is suitable for an edge device
running in a L3 intensive network where more space in the host-table is required.
Note that for switches in a virtual chassis, the device must be rebooted for this setting to apply; for stand-alone switches the packet forwarding engine (PFE) restarts.
Table 1 shows the maximum GBP supported configuration with 1K unique tags.
The vxlan-gbp-l3-profile is not applicable for the EX4100
switches.
| Tag Assignment | Maximum GBP Supported Configuration (EX4100 Series) | Maximum GBP Supported Configuration (EX4400 Series) | Maximum GBP Supported Configuration (EX4650 Series and QFX5120 Series) |
|---|---|---|---|
| MAC | NA | 32K | 64K |
| IPv4 | NA | 32K | 80K |
| Port | NA | 2K | 2K |
| VLAN | NA | 3K | 3K |
| Port + VLAN | NA | 3K | 3K |
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 23.2R1 for supported EX4400, EX4650, and QFX5120 Series switches.