reachability-fault
Syntax (PTX Series Devices)
reachability-fault {
actions {
fpc-restart-disable;
recovery-failure
{
pfe-restart-disable;
}
}
degraded {
apply-groups
apply-groups-except
error-threshold {
degradation percentage;
}
}
}Hierarchy Level
[edit chassis fabric event], [edit chassis member name fabric event]
Description
Fabric reachability fault detection. Configure options that apply to detect fabric reachability fault conditions and trigger automatic fabric connectivity restoration.
Options
-
actions— Reachability fault recovery actions. Depending on the reachability fault conditions, allow users to configure one or more recovery actions for the router to attempt automatic fabric connectivity restoration.-
fpc-restart-disable— Turn off FPC restart recovery action. recovery failure (pfe-restart-disable)— Configure PFE-offline to override the default action of disabling interfaces, if fabric connectivity cannot be restored.
-
-
degraded— Degraded fabric configuration. Allow users to configure the error threshold percentage value. The percentage value can range from 1 to 99, and it represents the percentage of fabric degradation at which the recovery action is taken.-
apply-groups group-name,— Inherit configuration data from these groups. -
+ apply-groups-except— Do not inherit configuration data from these groups. -
error-threshold— Fabric error threshold when PFE is degraded. degradation percentage— Degradation percentage values from 1 to 99.
-
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Evolved Release 22.4R1 (PTX10004, PTX10008, PTX10016).