traceroute srv6 spring-te micro-sids-stack
Syntax
traceroute srv6 spring-te micro-sids-stack usids ipv6addr nexthop-interface nexthop-interface nexthop-address ipv6addr <logical-system> <retries> <source ipv6addr> <tos> <no-resolve> <routing-instance routing-instance> <ttl> <wait> <probe-icmp>
Description
Performs hop-by-hop path tracing over an SRv6 SPRING-TE path using a user-defined stack of micro Segment Identifiers (uSIDs). The command provides visibility into the SRv6 forwarding path and aids in fault localization.
Traceroute over micro-SID stacks enables operational verification of intermediate hops and behavior across an SRv6 TE path.
Options
| logical-system |
(Optional) Name of logical system. |
| usids |
Sequence of micro Segment Identifiers defining the segment stack - [usid0 ... usidn(top)]. |
| nexthop-interface |
Interface used to send traffic to the next-hop. |
| nexthop-address |
Destination IPv6 next-hop address. |
| retries |
(Optional) Number of times to resend probe. |
| source |
(Optional) Source IPv6 address to use when sending probes. |
| tos |
(Optional) IPv6 type-of-service value. |
| no-resolve |
(Optional) Don't attempt to print addresses symbolically. |
| routing-instance |
(Optional) Name of routing instance for traceroute attempt. |
| ttl |
(Optional) Maximum time-to-live value. |
| wait |
(Optional) Number of seconds to wait before resending probe. |
| probe-icmp |
(Optional) Use ICMP echo request for probes. |
Required Privilege Level
network
Release Information
Command introduced in Junos OS Release 23.4R1.