show services unified-access-control status
Syntax
show services unified-access-control status
Description
Display the status of the connection between the SRX Series Firewall and the IC Series UAC Appliance as well as statistics to help debug connections to the IC Series appliance.
Use this command when you have configured the SRX Series Firewall to act as a Junos OS Enforcer in a Unified Access Control (UAC) deployment. When deployed as a Junos OS Enforcer, the SRX Series Firewall enforces the policies that are defined on the UAC’s IC Series appliance.
When the Packet Forwarding Engine (PFE) restarts, the firewall and IC don't communicate for the first 5 minutes. The firewall doesn't receive updates from IC, and the UAC connection status shows connected, reflecting an old status. The SRX Series Firewall reinitiates the connection if it receives no messages from the IC Series UAC Appliance for five minutes. The firewall establishes a new session when the route is valid.
Required Privilege Level
view
Sample Output
show services unified-access-control status
user@host> show services unified-access-control status Host Address Port Interface State dev106vm26 10.64.11.106 11123 ge-0/0/0.0 connected dev107vm26 10.64.11.106 11123 ge-0/0/0.0 closed
Release Information
Command introduced in Junos OS Release 9.4.