Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


show services service-sets cpu-usage



Display service set CPU usage as a percentage. The command is supported only on Adaptive Services PICs (SP PICs).



Display CPU usage for all adaptive services interfaces and service sets.

interface interface-name

(Optional) Display CPU usage for a particular interface. On M Series and T Series routers, the interface-name parameter can have the value sp-fpc/pic/port or rspnumber.

service-set service-set-name

(Optional) Display CPU usage for a particular service set. For the Layer 2 Tunneling Protocol (L2TP), you can use a tunnel group to represent a service set.

Required Privilege Level


Output Fields

Table 1 lists the output fields for the show services service-sets cpu-usage command. Output fields are listed in the approximate order in which they appear.

Table 1: show services service-sets cpu-usage Output Fields

Field Name

Field Description


Name of an adaptive services interface

Service set (system category)

Name of the CPU usage category:

  • idp_recommended—Name of the service sets (displays all the service sets attached to the service PICs)

  • Idle

  • System

  • Receive

  • Transmit

CPU utilization %

Percentage of the CPU resources being used

Sample Output

show services service-sets cpu-usage

Release Information

Command introduced before Junos OS Release 7.4.

Support added in Junos OS Release 19.3R2 for Next Gen Services on MX Series routers MX240, MX480 and MX960 with the MX-SPC3 services card.