show services rpm rfc2544-benchmarking test-id
Syntax
show services rpm rfc2544-benchmarking test-id test-id <brief | detail>
Description
Display information about the results of the RFC 2544-based benchmarking test for a specific test ID for each real-time performance monitoring (RPM) instance. The values in the output displayed vary, depending on the state in which the test is passing through, when you issue the command.
Options
test-id
|
Display test results for the specified unique identifier. |
brief | detail |
(Optional) Display the specified level of output. |
Required Privilege Level
view
Output Fields
Table 1 lists the
output fields for the show services rpm rfc2544-benchmarking
test-id command. Output fields are listed in the approximate
order in which they appear.
Field Name |
Field Description |
Level of Output |
|---|---|---|
|
Details of the performed RFC 2544 benchmarking test. |
None specified |
|
Unique identifier configured for the test. |
None specified |
|
Name configured for the test. |
None specified |
|
The type of actual test run that is collected for the test, based on the configured test type. Throughput-related, latency, frame-loss, or back-to-back frames-related information is displayed for ACX Series routers. Reflected packets-related information is displayed for MX104 Series routers. |
None specified |
|
Mode configured for the test on the router. Test modes are:
|
None specified |
|
Size of the test packets in bytes. This field is valid only when the test mode is Initiate-and-Terminate. |
None specified |
|
State of the test that is in progress or active when the output is displayed. For details about the states, see RFC 2544-Based Benchmarking Test States. |
None specified |
Status |
Indicates whether the test is currently in progress or has been terminated. |
None specified |
|
Time at which the test started in Coordinated Universal Time (UTC) format (YYYY-MM-DD-HH:MM:SS). |
None specified |
|
Time at which the test completed. |
None specified |
|
Date, time, and how long ago the statistics for the test
were cleared. The format is year-month-day hour:minute:second:timezone (hour:minute:second ago). For example, 2010-05-17
07:51:28 PDT (00:04:33 ago). If you did not clear the statistics previously
at any point, |
None specified |
|
(ACX Series routers only) Details of the specified test profile |
|
|
(ACX Series routers only) Name of the configured test profile that contains the parameters for the test |
|
|
(ACX Series routers only) Size of the test packets in bytes |
|
|
(ACX Series routers only) Theoretical maximum bandwidth configured for the test. This value is typically set to the bandwidth of the server being tested. Valid values are 1 Kbps through 1,000,000 Kbps (1 Gbps). The value defined is the highest bandwidth value tested for this test. |
|
|
Details of the configured test ID. |
|
|
Mode configured for the test. Test modes are Initiate-and-Terminate and Reflect. |
|
|
Period in seconds for which the test has been performed. |
|
|
The underlying service on which the test is run. Test families are:
|
|
|
(ACX Series routers only) Name of the routing instance for the test |
|
|
Details of the configured |
|
|
Name of the egress interface from which the test frames are sent |
|
|
Source IPv4 address used in the IP header of the generated test frame. |
|
|
Destination IPv4 address used in the IP header of the generated test frame. |
|
|
Source UDP port number used in the UDP header of the generated test frame. |
|
|
Destination UDP port number used in the UDP header of the generated test frame. |
|
|
Details of the configured CCC family for an Ethernet service |
|
|
(ACX Series routers only) Source MAC address used in generated test frames for a CCC or Ethernet pseudowire service. |
|
|
(ACX Series routers only) Destination MAC address used in generated test frames for a CCC or Ethernet pseudowire service. |
|
|
(ACX Series routers only) Inner VLAN ID for test-frames. |
|
|
(ACX Series routers only) Outer VLAN ID for test-frames. |
|
|
Test is run in the egress direction of the interface (NNI) |
|
|
Test is run in the ingress direction of the interface (UNI) |
|
Rfc2544 throughput test information |
(ACX Series routers only) Details of the throughput test | detail |
|
Percentage of the steady state load for the test. |
|
|
Mode of the test iteration: Binary or step-down. |
|
|
The test step percentage for tests. If not specified, the default step-percent is 10 percent. This parameter is ignored for all type of tests other than frame-loss tests. |
|
|
The theoretical limit of the media for the frame size configured for the test. This value is typically set to the bandwidth of the server being tested. |
|
|
Packet size of the test frames in bytes. |
|
|
Number of the test iteration. |
|
|
Period in seconds for which the test iteration is run |
|
|
Amount of time that has passed, in seconds, since the start of the test. |
|
|
Total count of packets-per-second (pps) transmitted during the test. |
|
|
Number of transmitted test packets. |
|
|
Number of received test packets. |
|
|
Number of transmitted bytes. |
|
|
Number of received bytes. |
|
|
Percentage of throughput for the test iteration. |
|
|
Results of the completed throughput test for a particular packet size. |
|
|
Number of the iteration with the highest throughout, among the listed iterations. |
|
|
Packets-per-second (pps) count of the iteration with the highest throughout, among the listed iterations. |
|
|
Percentage of throughput of the iteration with the highest throughout, among the listed iterations. |
|
|
Consolidated information of the throughput test. |
|
|
Size of the test packet in bytes. |
|
|
Theoretical frame rate in packets-per-second. |
|
|
Number of transmitted packets. |
|
|
Number of received packets. |
|
|
The offered throughput in percentage of the chosen service (such as Layer 3 or Ethernet pseudowire). |
|
|
Available bandwidth of the service based on the calculated throughput. |
|
| Rfc2544 latency test information : | (ACX Series routers only) Details of the latency test | detail |
|
Theoretical maximum bandwidth configured for the test. This value is typically set to the bandwidth of the server being tested. Valid values are 1 Kbps through 1,000,000 Kbps (1 Gbps). The value defined is the highest bandwidth value used for this test. |
|
|
Percentage of the steady state load for the test. |
|
|
Period in seconds for which the test has been performed. |
|
|
Size of the test packet in bytes. |
|
|
Number of the test iteration. |
|
|
Period in seconds for which the test iteration is run. |
|
|
Amount of time that has passed, in seconds, since the start of the test. |
|
|
Total count of packets-per-second (pps) transmitted during the test. |
|
|
Number of transmitted test packets. |
|
|
Number of received test packets. |
|
|
Displays the latency parameters. |
|
|
Aggregated minimum latency in nanoseconds. |
|
|
Aggregated average latency in nanoseconds. |
|
|
Aggregated maximum latency in nanoseconds. |
|
|
Aggregated probe latency in nanoseconds. |
|
|
Results of the latency test completed for a particular packet size. |
|
|
Average of the minimum latency in nanoseconds. |
|
|
Average of the average latency in nanoseconds. |
|
|
Average of the maximum latency in nanoseconds. |
|
|
Average of the probe latency in nanoseconds. |
|
|
Consolidated statistics of the latency test. |
|
|
Size of the test packet in bytes. |
|
|
Theoretical frame rate in packets-per-second. |
|
|
Number of transmitted packets. |
|
|
Number of received packets. |
|
|
Displays the latency parameters. |
|
|
Aggregated minimum latency in nanoseconds. |
|
|
Aggregated average latency in nanoseconds. |
|
|
Aggregated maximum latency in nanoseconds. |
|
|
Aggregated probe latency in nanoseconds. |
|
| Rfc2544 Back-Back test information : | (ACX Series routers only) Details of the back-to-back frames or bursty frames test. | detail |
|
Length of the first burst when test frames are sent, as a measure of number of seconds at the rate of Kbps. |
|
|
Mode of the test iteration: Binary or step-down. |
|
|
The test step percentage for tests. If not specified, the default step-percent is 10 percent. This parameter is ignored for all type of tests other than frame-loss tests. |
|
|
The theoretical limit of the media for the frame size configured for the test. This value is typically set to the bandwidth of the server being tested. |
|
|
Packet size of the test frames in bytes. |
|
|
Number of the test iteration. |
|
|
Number of packets in the burst. |
|
|
Amount of time that has passed, in seconds, since the start of the test. |
|
|
Number of transmitted test packets. |
|
|
Number of received test packets. |
|
|
Number of transmitted bytes. |
|
|
Number of received bytes. |
|
|
Results of the back-to-back frames test completed for a certain packet size. |
|
|
Number of the iteration with the longest burst. |
|
|
Time in seconds of the burst of the iteration with the longest burst. |
|
|
Number of packets during the burst of the iteration with the longest burst. |
|
|
Consolidated statistics of the back-to-back frames test. |
|
|
Size of the test packets in bytes. |
|
|
Computed burst length in terms of number of packets. |
|
| Rfc2544 frame-loss test information : | (ACX Series routers only) Details of the frame-loss test. | detail |
|
Length of the first burst when test frames are sent, as a measure of number of seconds at the rate of Kbps. |
|
|
Mode of the test iteration: Binary or step-down. |
|
|
The test step percentage for tests. If not specified, the default step-percent is 10 percent. This parameter is ignored for all type of tests other than frame-loss tests. |
|
|
The theoretical limit of the media for the frame size configured for the test. This value is typically set to the bandwidth of the server being tested. |
|
|
Size of the test packets in bytes. |
|
|
Number of the test iteration. |
|
|
Period, in seconds, for which the test iteration is run. |
|
|
The offered throughput in percentage of the chosen service (such as Layer 3 or Ethernet pseudowire) |
|
|
Amount of time that has passed, in seconds, since the start of the test. |
|
|
Theoretical frame rate in packets-per-second. |
|
|
Number of transmitted test packets. |
|
|
Number of received test packets. |
|
|
Number of transmitted bytes. |
|
|
Number of received bytes. |
|
|
Percentage of frames that must been forwarded by the router under steady state (constant) load, but were not forwarded due to lack of resources. |
|
|
Results of the frame-loss test completed for a certain packet size. |
|
|
Percentage of dropped frames for the specified packet size |
|
|
Consolidated statistics of the frame-loss test |
|
|
Size of the test packet in bytes. |
|
|
Theoretical frame rate in packets-per-second. |
|
|
Percentage of throughput for the test iteration. |
|
|
Number of transmitted packets. |
|
|
Number of received packets. |
|
|
Percentage of dropped frames for the specified packet size |
|
Sample Output
- show services rpm rfc2544-benchmarking test-id detail (Throughput Test on ACX Series Routers )
- show services rpm rfc2544-benchmarking test-id detail (Latency Test on ACX Series Routers)
- show services rpm rfc2544-benchmarking test-id detail (Frame Loss Test on ACX Series Routers)
- show services rpm rfc2544-benchmarking test-id detail (Back-to-Back Frames Test on ACX Series Routers)
- show services rpm rfc2544-benchmarking test-id detail (Reflection Test on MX104 Routers)
- show services rpm rfc2544-benchmarking test-id brief (Reflection Test on MX104 Routers)
- show services rpm rfc2544-benchmarking test-id detail (Reflection Test on MX104 Routers)
- show services rpm rfc2544-benchmarking test-id brief (Reflection Test on MX104 Routers)
- show services rpm rfc2544-benchmarking test-id detail (Reflection Test on SRX300 and SRX550HM)
show services rpm rfc2544-benchmarking test-id detail (Throughput Test on ACX Series Routers )
user@host> show services rpm rfc2544-benchmarking test-id 19 detail
Test information :
Test id: 19, Test name: test1, Test type: Throughput
Test mode: Initiate-and-Terminate
Test packet size: 64 1280
Test state: RFC2544_TEST_STATE_COMPLETED
Test start time: 2005-07-29 10:25:00 UTC
Test finish time: 2005-07-29 10:26:02 UTC
Counters last cleared: Never
Test-profile Configuration:
Test-profile name: prof_tput
Test packet size: 64 1280
Therotical max bandwidth : 993000 kbps
Test Configuration:
Test mode: Initiate-and-Terminate
Duration in seconds: 20
Test family: INET
Routing Instance Name: default
Inet family Configuration:
Egress Interface : ge-0/1/1.0
Source ipv4 address: 192.0.2.1
Destination ipv4 address: 192.0.2.2
Source udp port: 2020
Destination udp port: 3030
Rfc2544 throughput test information :
Initial test load percentage : 100.00 %
Test iteration mode : Binary
Test iteration step percent : 50.00 %
Therotical max bandwidth : 993000 kbps
Test packet size: 64
Iteration Duration Elapsed pps Tx Rx Tx Rx Percentage
(sec) time Packets Packets Bytes Bytes throughput
1 3 3 134918 404754 404754 27523272 27523272 10.00 %
2 20 20 1349184 26983501 26983501 1834878068 1834878068 100.00 %
Result of the iteration runs : Throughput Test complete for packet size 64
Best iteration : 2, Best iteration (pps) : 1349184
Best iteration throughput : 100.00 %
Test packet size: 1280
Iteration Duration Elapsed pps Tx Rx Tx Rx Percentage
(sec) time Packets Packets Bytes Bytes throughput
1 3 3 9489 28467 28467 36551628 36551628 10.00 %
2 20 20 94896 1897920 1897920 2436929280 2436929280 100.00 %
Result of the iteration runs : Throughput Test complete for packet size 1280
Best iteration : 2, Best iteration (pps) : 94896
Best iteration throughput : 100.00 %
RFC2544 Throughput test results summary:
----------------------------------------
Packet Theoretical Tx Rx Offered throughput Measured
Size rate (pps) Packets Packets (percentage) bandwidth (kbps)
64 1349184 26983501 26983501 100.00 % 993000
1280 94896 1897920 1897920 100.00 % 993000
show services rpm rfc2544-benchmarking test-id detail (Latency Test on ACX Series Routers)
user@host> show services rpm rfc2544-benchmarking test-id 37 detail
Test information :
Test id: 37, Test name: test1, Test type: Latency
Test mode: Initiate-and-Terminate
Test packet size: 64 1280
Test state: RFC2544_TEST_STATE_COMPLETED
Test start time: 2005-07-29 10:26:41 UTC
Test finish time: 2005-07-29 10:36:15 UTC
Counters last cleared: Never
Test-profile Configuration:
Test-profile name: prof_latency
Test packet size: 64 1280
Therotical max bandwidth : 993000 kbps
Test Configuration:
Test mode: Initiate-and-Terminate
Duration in seconds: 10
Test family: INET
Routing Instance Name: default
Inet family Configuration:
Egress Interface : ge-0/1/1.0
Source ipv4 address: 192.0.2.1
Destination ipv4 address: 192.0.2.2
Source udp port: 2020
Destination udp port: 3030
Rfc2544 latency test information :
Therotical max bandwidth : 993000 kbps
Initial test load percentage : 100.00 %
Duration in seconds: 10
Test packet size: 64
Iteration Duration Elapsed pps Tx Rx
(sec) time Packets Packets
1 3 3 134918 404754 404754
2 10 10 1349184 13491751 13491751
3 10 10 1349184 13491751 13491751
4 10 10 1349184 13491751 13491751
5 10 10 1349184 13491751 13491751
6 10 10 1349184 13491751 13491751
7 10 10 1349184 13491751 13491751
8 10 10 1349184 13491751 13491751
9 10 10 1349184 13491751 13491751
10 10 10 1349184 13491751 13491751
11 10 10 1349184 13491751 13491751
12 10 10 1349184 13491751 13491751
13 10 10 1349184 13491751 13491751
14 10 10 1349184 13491751 13491751
15 10 10 1349184 13491751 13491751
16 10 10 1349184 13491751 13491751
17 10 10 1349184 13491751 13491751
18 10 10 1349184 13491751 13491751
19 10 10 1349184 13491751 13491751
20 10 10 1349184 13491751 13491751
21 10 10 1349184 13491751 13491751
-------------- Latency ---------------
Min(ns) Avg(ns) Max(ns) Probe(ns)
17464 18770 18880 18784
17472 18799 20488 18848
17472 18799 20416 18816
17472 18799 20440 18704
17464 18799 20376 18880
17464 18799 20232 18832
17464 18799 20400 18848
17472 18799 20240 18864
17472 18799 20264 18848
17464 18799 20264 18880
17472 18800 20320 18864
17464 18799 20176 18864
17464 18800 20248 18864
17464 18800 20272 18864
17464 18799 20472 18832
17464 18799 20256 18880
17464 18799 20336 18848
17464 18800 20688 18848
17472 18800 20504 18864
17464 18799 20448 18768
17472 18799 20240 18864
Result of the iteration runs : Latency Test complete for packet size 64
Avg (min) Latency : 17466
Avg (avg) latency : 18799
Avg (Max) latency : 20360
Avg (probe) latency : 18844
Test packet size: 1280
Iteration Duration Elapsed pps Tx Rx
(sec) time Packets Packets
1 3 3 9489 28467 28467
2 10 10 94896 948960 948960
3 10 10 94896 948960 948960
4 10 10 94896 948960 948960
5 10 10 94896 948960 948960
6 10 10 94896 948960 948960
7 10 10 94896 948960 948960
8 10 10 94896 948960 948960
9 10 10 94896 948960 948960
10 10 10 94896 948960 948960
11 10 10 94896 948960 948960
12 10 10 94896 948960 948960
13 10 10 94896 948960 948960
14 10 10 94896 948960 948960
15 10 10 94896 948960 948960
16 10 10 94896 948960 948960
17 10 10 94896 948960 948960
18 10 10 94896 948960 948960
19 10 10 94896 948960 948960
20 10 10 94896 948960 948960
21 10 10 94896 948960 948960
-------------- Latency ---------------
Min(ns) Avg(ns) Max(ns) Probe(ns)
68712 70031 70576 69456
68728 70344 71808 70512
68720 70344 71744 70352
68720 70344 71680 70112
68720 70345 71856 70352
68720 70344 71808 70384
68720 70344 71752 70480
68720 70344 71880 70112
68720 70344 71792 70320
68728 70345 73344 70336
68720 70344 71688 70560
68728 70345 71896 70496
68720 70344 71760 70096
68720 70344 71776 70320
68720 70344 71760 70400
68712 70345 71920 70352
68720 70344 71792 70576
68720 70345 71840 70320
68720 70344 71792 70368
68720 70345 71824 70464
68712 70345 71904 70512
Result of the iteration runs : Latency Test complete for packet size 1280
Avg (min) Latency : 68720
Avg (avg) latency : 70344
Avg (Max) latency : 71880
Avg (probe) latency : 70371
RFC2544 Latency test results summary:
----------------------------------------
Packet Theoretical Tx Rx ------------- Latency -------------
Size rate (pps) Packets Packets Min(ns) Avg(ns) Max(ns) Probe(ns)
64 1349184 269835020 269835020 17466 18799 20360 18844
1280 94896 18979200 18979200 68720 70344 71880 70371
show services rpm rfc2544-benchmarking test-id detail (Frame Loss Test on ACX Series Routers)
user@host> show services rpm rfc2544-benchmarking test-id 73 detail
Test information :
Test id: 73, Test name: test1, Test type: Frame-Loss
Test mode: Initiate-and-Terminate
Test packet size: 64 1280
Test state: RFC2544_TEST_STATE_COMPLETED
Test start time: 2005-07-29 10:38:41 UTC
Test finish time: 2005-07-29 10:41:19 UTC
Counters last cleared: Never
Test-profile Configuration:
Test-profile name: prof_fl
Test packet size: 64 1280
Therotical max bandwidth : 993000 kbps
Test Configuration:
Test mode: Initiate-and-Terminate
Duration in seconds: 20
Test family: INET
Routing Instance Name: default
Inet family Configuration:
Egress Interface : ge-0/1/1.0
Source ipv4 address: 192.0.2.1
Destination ipv4 address: 192.0.2.2
Source udp port: 2020
Destination udp port: 3030
Rfc2544 frame-loss test information :
Initial test load percentage : 100.00 %
Test iteration mode : step-down
Test iteration step percent : 10 %
Therotical max bandwidth : 993000 kbps
Test packet size: 64
Iteration Duration Elapsed Offered pps Tx Rx Tx Rx Frame-loss
(sec) time throughput% Packets Packets Bytes Bytes rate %
1 3 3 10.00 % 134918 404754 404754 27523272 27523272 0.00 %
2 20 20 100.00 % 1349184 26983501 26983501 1834878068 1834878068 0.00 %
3 20 20 100.00 % 1349184 26983501 26983501 1834878068 1834878068 0.00 %
4 20 20 100.00 % 1349184 26983501 26983501 1834878068 1834878068 0.00 %
Result of the iteration runs : Frame-loss test complete for packet size 64
Frame-loss rate (percent) : 0.00 %
Test packet size: 1280
Iteration Duration Elapsed Offered pps Tx Rx Tx Rx Frame-loss
(sec) time throughput% Packets Packets Bytes Bytes rate %
1 3 3 10.00 % 9489 404754 28467 36551628 36551628 0.00 %
2 20 20 100.00 % 94896 1897920 1897920 2436929280 2436929280 0.00 %
3 20 20 100.00 % 94896 1897920 1897920 2436929280 2436929280 0.00 %
4 20 20 100.00 % 94896 1897920 1897920 2436929280 2436929280 0.00 %
Result of the iteration runs : Frame-loss test complete for packet size 1280
Frame-loss rate (percent) : 0.00 %
RFC2544 Frame-loss test results summary:
----------------------------------------
Packet Theoretical Percentage Tx Rx Frame Loss
Size rate (pps) throughput Packets Packets rate percent
64 1349184 100.00 % 26983501 26983501 0.00 %
1280 94896 100.00 % 1897920 1897920 0.00 %
show services rpm rfc2544-benchmarking test-id detail (Back-to-Back Frames Test on ACX Series Routers)
user@host> show services rpm rfc2544-benchmarking test-id 55 detail
Test information :
Test id: 55, Test name: test1, Test type: Back-Back-Frames
Test mode: Initiate-and-Terminate
Test packet size: 64 1280
Test state: RFC2544_TEST_STATE_COMPLETED
Test start time: 2005-07-29 10:36:54 UTC
Test finish time: 2005-07-29 10:37:57 UTC
Counters last cleared: Never
Test-profile Configuration:
Test-profile name: prof_b2b
Test packet size: 64 1280
Therotical max bandwidth : 993000 kbps
Test Configuration:
Test mode: Initiate-and-Terminate
Duration in seconds: 20
Test family: INET
Routing Instance Name: default
Inet family Configuration:
Egress Interface : ge-0/1/1.0
Source ipv4 address: 192.0.2.1
Destination ipv4 address: 192.0.2.2
Source udp port: 2020
Destination udp port: 3030
Rfc2544 Back-Back test information :
Initial burst length: 20 seconds at 993000 kbps
Test iteration mode : Binary
Test iteration step percent : 50.00 %
Test packet size: 64
Iteration Burst Length Elapsed Tx Rx Tx Rx
(Packets) time Packets Packets Bytes Bytes
1 404754 3 404754 404754 27523272 27523272
2 26983680 20 26983680 26983680 1834890240 1834890240
Result of the iteration runs : Back-Back-Frames Test complete for packet size 64
Best iteration : 2
Measured burst (num sec) : 20 sec,
Measured burst (num pkts) : 26983680 packets
Result of the iteration runs : Back-Back-Frames Test complete for packet size 64
Best iteration : 2
Measured burst (num sec) : 20 sec,
Measured burst (num pkts) : 26983680 packets
Test packet size: 1280
Iteration Burst Length Elapsed Tx Rx Tx Rx
(Packets) time Packets Packets Bytes Bytes
1 28467 3 28467 28467 36551628 36551628
2 1897920 20 1897920 1897920 2436929280 2436929280
Result of the iteration runs : Back-Back-Frames Test complete for packet size 12
Best iteration : 2
Measured burst (num sec) : 20 sec,
Measured burst (num pkts) : 1897920 packets
RFC2544 Back-Back test results summary:
----------------------------------------
Packet Measure Burst
Size length (Packets)
64 26983680 packets
1280 1897920 packets
show services rpm rfc2544-benchmarking test-id detail (Reflection Test on MX104 Routers)
user@host> show services rpm rfc2544-benchmarking test-id 1 detail
Test information :
Test id: 1, Test name: fort_uni_inet_ref, Test type: Reflect
Test mode: Reflect
Test packet size: 0
Test state: RFC2544_TEST_STATE_RUNNING
Status: Running
Test start time: 2013-12-09 16:24:52 IST
Test finish time: TEST_RUNNING
Counters last cleared: Never
Test Configuration:
Test mode: Reflect
Duration in seconds: 864000
Test family: INET
Routing Instance Name: default
Inet family Configuration:
Egress Interface : ge-0/3/1.0
Destination ipv4 address: 198.51.100.2
Destination udp port: 200
Elapsed Reflected Reflected
time Packets Bytes
176 8977917 9031784502
show services rpm rfc2544-benchmarking test-id brief (Reflection Test on MX104 Routers)
user@host> show services rpm rfc2544-benchmarking test-id 1 brief
Test information :
Test id: 1, Test name: fort_uni_inet_ref, Test type: Reflect
Test mode: Reflect
Test packet size: 0
Test state: RFC2544_TEST_STATE_RUNNING
Status: Running
Test start time: 2013-12-09 16:24:52 IST
Test finish time: TEST_RUNNING
Counters last cleared: Never
show services rpm rfc2544-benchmarking test-id detail (Reflection Test on MX104 Routers)
user@host> show services rpm rfc2544-benchmarking test-id 2 detail
Test information :
Test id: 2, Test name: fort_uni_inet_ref, Test type: Reflect
Test mode: Reflect
Test packet size: 0
Test state: RFC2544_TEST_STATE_RUNNING
Status: Running
Test start time: 2013-12-09 16:39:18 IST
Test finish time: TEST_RUNNING
Counters last cleared: Never
Test Configuration:
Test mode: Reflect
Duration in seconds: 864000
Test family: CCC
Routing Instance Name: default
CCC family Configuration:
Interface : ge-0/3/2.0
Test direction: Egress
Elapsed Reflected Reflected
time Packets Bytes
23 809137 825319740
show services rpm rfc2544-benchmarking test-id brief (Reflection Test on MX104 Routers)
user@host> show services rpm rfc2544-benchmarking test-id 2 brief
Test information :
Test id: 2, Test name: fort_uni_inet_ref, Test type: Reflect
Test mode: Reflect
Test packet size: 0
Test state: RFC2544_TEST_STATE_RUNNING
Status: Running
Test start time: 2013-12-09 16:39:18 IST
Test finish time: TEST_RUNNING
Counters last cleared: Never
show services rpm rfc2544-benchmarking test-id detail (Reflection Test on SRX300 and SRX550HM)
user@host> show services rpm rfc2544-benchmarking test-id 1 detail
Test information :
Test id: 1, Test name: ts13, Test type: Reflect
Test mode: Reflect
Test packet size: 0
Test state: TEST_STATE_RUNNING
Status: Running
Test start time: 2020-07-08 19:53:23 CST
Test finish time: TEST_RUNNING
Counters last cleared: Never
Test Configuration:
Test mode: Reflect
Duration in seconds: 864000
Test finish wait duration in seconds: 1
Test family: INET
Test iterator pass threshold: 0.50 %
Test receive failure threshold: 0.00 %
Test transmit failure threshold: 0.50 %
Routing Instance Name: default
Inet family Configuration:
Egress Interface : ge-0/0/13.0
Destination ipv4 address: 10.0.2.1
Destination udp port: 400
Elapsed Reflected Reflected
time Packets Bytes
62053 220259916 134445283434
Release Information
Command introduced in Junos OS Release 12.3X52.