show security advance-policy-based-routing multipath rule
Syntax
show security advance-policy-based-routing multipath rule rule-name
Description
Display the multipath rule details, status , and statistics.
Required Privilege Level
view
Output Fields
Table 1 lists
the output fields for the show security advance-policy-based-routing multipath
rule command. Output fields are listed in the approximate order in which they
appear.
| Field Name | Field Description |
|---|---|
| Multipath Rule Information | |
|
Multipath rule name |
Name of the multipath rule |
| Multipath rule type | Type of multipath rule. Multipath at forward direction or multipath at reverse direction |
| Multipath rule state | State of the rule (active-config or active-dynamic) |
| Configured number of paths | Number of paths configured in the multipath rule |
| Configured applications | Application configured in the multipath rule |
| Path Group Information | |
| Total path groups | Destination groups. You can group all the overlay paths terminating at the same destination under a destination group |
| Path-Group-Id | ID of the path group |
| State | State of the paths (if active or not) |
| Avl-Num-Paths |
Available number of paths |
| Statistics | |
|
Current Sessions |
Number of sessions active currently |
|
Ignored Sessions |
Number of sessions ignored |
|
Applications Matched |
Number of sessions where application traffic matched |
|
Applications Switched |
Number of sessions where application traffic changed after the final match |
|
Stopped due to Bandwidth Limit |
Number of sessions stopped because of bandwidth limits. |
|
Packets in path inactive state |
Number of packets transferred when the rule is not active. |
|
Packets in path active state |
Number of packets transferred when the rule is active |
| Less than Configured Paths | Number of paths not configured. |
|
Midstream Packets Ignored |
Number of sessions ignored in midstream |
|
Total Packets Processed |
Total number of packets processed |
|
Total Packets Copied |
Total number of packets duplicated |
| SLA Violated | Number of times SLA was violated |
| SLA Met | Number of times SLA was met |
| Status | |
|
Policy reference count |
Current sessions count on the policy. |
|
Credit Limit (Mbps) |
Credit limit. The policers begin to drop packets when the current credit exceeds the limit. Total credit available in Mbs per second. |
|
Policer Rate (Kbits per ms) |
Policer rate. Total credit available in Kbs per millisecond. |
|
Bandwidth Limit |
Configured bandwidth limit. |
|
Maximum Wait Time (secs) |
Configured maximum wait time |
|
Time to Reinforce (secs) |
Time after which the multipath routing resumes when bandwidth limit has reached. |
|
Application Hit List |
Matched application list |
| Sender Path Groups Information: | |
|
Total sender path groups |
Path groups from sending device |
|
Path-Group-Id |
Identification number of the paths |
|
Cur-Num-Paths |
Current number of paths |
| Path Information | |
|
Src-IP |
Source IP address |
|
Pkts-Sent |
Packets sent for destination IP address |
|
Link-type |
Link type (MPLS or IP) selected for destination IP address |
| Sender Application Groups Information | |
| Total sender applications | Number of application traffic sessions |
| Application Name: | Name of application |
| Application Id | Application ID |
| Pkts-Sent | Number of application traffic packet sent |
| Path Information | |
|
Src-IP |
Source IP address |
|
Pkts-Sent |
Packets sent for destination IP address |
|
Link-type |
Link type (MPLS or IP) selected for destination IP address |
| Sender Cos Q Statistics | |
|
Total sender cos queues |
Total number CoS queues. |
|
Pkts-Sent |
Packets sent in the CoS queue ID for the entire multipath rule. |
| Path Information | |
|
Src-IP |
Source IP address |
|
Pkts-Sent |
Packets sent for destination IP address |
|
Link-type |
Link type (MPLS or IP) selected for destination IP address |
| Field Name | Field Description |
|---|---|
| Multipath Rule Information | |
|
Multipath rule name |
Name of the multipath rule |
| Multipath rule type | Type of multipath rule. Multipath at forward direction or multipath at reverse direction |
| Multipath rule state | State of the rule (active-config or active-dynamic) |
| Configured number of paths | Number of paths configured in the multipath rule |
| Configured applications | Application configured in the multipath rule |
| Path Group Information | |
| Total path groups | Destination groups. You can group all the overlay paths terminating at the same destination under a destination group |
| Path-Group-Id | ID of the path group |
| State | State of the paths (if active or not) |
| Avl-Num-Paths |
Available number of paths |
| Path Groups Information | |
|
Total path groups |
Destination groups. You can group all the overlay paths terminating at the same destination under a destination group |
|
Path-Group-Id |
Identification number of the paths |
|
State |
State of the paths (if active or not) |
|
Avl-Num-Paths |
Available number of routes for the destination path groups |
|
Receiver Information (Path Groups Information) |
|
|
Total receiver path groups |
Total number of path group |
|
id |
Identification number of path group |
| Cur-Num-Paths: | Number of available paths |
| Pkts-Rcvd | Number of packets received |
| Out-of-seq pkt drop: | Number of out-of-squence packets dropped |
|
Avg-Pkt-Loss |
Average packet loss for the combined links |
|
Avg-Ingress-Jitter(us) |
Average ingress jitter for the combined links |
| Path Information | |
|
Dst-IP |
Destination IP address |
|
Pkt-Loss(%) |
Percentage of packet lost in this link |
| Pkts-Rcvd | Number of packets received |
|
Ingress-Jitter(us) |
Ingress jitter experienced in the link |
|
Reduction-Pkt-Loss(%) |
Reduction in packet loss over the link (because of multipath routing) |
|
Reduction-Ingress-Jitter(us) |
Reduction in ingress jitter over the link (because of multipath routing) |
| Receiver Application Groups Information: | |
| Total receiver applications | Number of application traffic received |
| id | Application ID |
| Name | Application Name |
| Pkts-Rcvd | Number of packets received |
|
Avg-Pkt-Loss |
Average packet loss for the combined links |
|
Avg-Ingress-Jitter(us) |
Average ingress jitter for the combined links |
| Out-of-seq pkt drop: | Number of out-of-squence packets dropped |
| Path Information | |
|
Dst-IP |
Destination IP address |
| Pkts-Rcvd | Number of packets received |
|
Pkt-Loss(%) |
Percentage of packet lost in this link |
|
Ingress-Jitter(us) |
Ingress jitter experienced in the link |
|
Reduction-Pkt-Loss(%) |
Reduction in packet loss over the link (because of multipath routing) |
|
Reduction-Ingress-Jitter(us) |
Reduction in ingress jitter over the link (because of multipath routing) |
| Cos Q Statistics | |
|
Total receiver cos queues |
Total number CoS queues. |
|
Id |
CoS queue identification number. |
| Name | Cos queue group name |
|
Pkts-Rcvd |
Packets sent in the CoS queue ID for the entire multipath rule. |
|
Ingress-Jitter(us) |
Ingress jitter experienced in the link |
|
Reduction-Pkt-Loss(%) |
Reduction in packet loss over the link (because of multipath routing) |
|
Reduction-Ingress-Jitter(us) |
Reduction in ingress jitter over the link (because of multipath routing) |
|
Number of out-of-sync packets dropped in the queue |
Packets sent in the CoS queue ID for the entire multipath rule. |
| Path Information | |
|
Dst-IP |
Destination IP address |
| Pkts-Rcvd | Number of packets received |
|
Pkt-Loss(%) |
Percentage of packet lost in this link |
|
Ingress-Jitter(us) |
Ingress jitter experienced in the link |
|
Reduction-Pkt-Loss(%) |
Reduction in packet loss over the link (because of multipath routing) |
|
Reduction-Ingress-Jitter(us) |
Reduction in ingress jitter over the link (because of multipath routing) |
Sample Output
- show security advance-policy-based-routing multipath rule (For Spoke Device) (Junos OS Release 21.2R1)
- show security advance-policy-based-routing multipath rule (Device Configured to Receive Traffic) (Junos OS Release 21.2R1)
show security advance-policy-based-routing multipath rule (For Spoke Device) (Junos OS Release 21.2R1)
user@host> show security advance-policy-based-routing multipath rule multi1
Multipath Rule Status:
Multipath Rule Information:
Logical system root-logical-system
Multipath rule name amr-rule1
Multipath rule type Packet-copy
Multipath rule state Active
Configured number of paths 2
Configured applications junos:FTP, junos:HTTP, junos:SSH, junos:YAHOO
Path Group Information:
Total path groups : 1
Path-Group-Id State Avl-Num-Paths
2234384386 Active 3
Statistics:
Current Sessions 0
Ignored Sessions 0
Applications Matched 3
Applications Switched 0
Stopped due to Bandwidth Limit 0
Packets in path inactive state 8
Packets in path active state 15457
Less than Configured Paths 0
Midstream Packets Ignored 0
Total Packets Processed 15465
Total Packets Copied 15455
SLA Violated 0
SLA Met 0
Status:
Policy reference count 4
Credit Limit (Mbps) 300
Policer Rate (Kbits per ms) 0
Bandwidth Limit Not-Reached
Maximum Wait Time (secs) 60
Time to Reinforce (secs) 0
Application Hit List junos:HTTP, junos:SSH
Sender Path Groups Information:
Total sender path groups : 1
Path-Group-Id : 2234384386, Cur-Num-Paths: 2
Path Information:
Src-IP Pkts-Sent Link-type
40.1.1.2 15455 IP
41.1.1.2 15011 IP
42.1.1.2 444 IP
Sender Application Groups Information:
Total sender applications: 2
Application Name: junos:HTTP, Application Id: 67, Pkts-Sent: 15427
Path Information:
Src-IP Pkts-Sent Link-type
40.1.1.2 15427 IP
41.1.1.2 14983 IP
42.1.1.2 444 IP
Application Name: junos:SSH, Application Id: 198, Pkts-Sent: 28
Path Information:
Src-IP Pkts-Sent Link-type
40.1.1.2 28 IP
41.1.1.2 28 IP
Sender Cosq Groups Information:
Total sender cosq's: 1
Cos Q : 0, Pkts-Sent: 15455
Path Information:
Src-IP Pkts-Sent Link-type
40.1.1.2 15455 IP
41.1.1.2 15011 IP
42.1.1.2 444 IP
show security advance-policy-based-routing multipath rule (Device Configured to Receive Traffic) (Junos OS Release 21.2R1)
user@host> show security advance-policy-based-routing multipath rule multi1
Multipath Rule Status:
Multipath Rule Information:
Logical system root-logical-system
Multipath rule name amr-rule1
Multipath rule type Packet-copy
Multipath rule state Active
Configured number of paths 2
Configured applications junos:FTP, junos:HTTP, junos:SSH, junos:YAHOO
Path Group Information:
Total path groups : 1
Path-Group-Id State Avl-Num-Paths
2234384386 Active 3
Receiver Path Groups Information:
Total receiver path groups : 1
Id: 2234384386, Cur-Num-Paths: 2, Pkts-Rcvd: 15411, Avg-Pkt-Loss(%): 0, Avg-Ingress-Jitter(us): 73, Out-of-seq pkt drop: 15411
Path Information:
Dst-IP Pkts-Rcvd Pkt-Loss(%) Ingress-Jitter(us) Reduction-Pkt-Loss(%) Reduction-Ingress-Jitter(us)
40.1.1.1 15412 0 69 0 -4
41.1.1.1 14967 0 255 0 182
42.1.1.1 443 0 111 0 38
Receiver Application Groups Information:
Total receiver applications: 2
Id: 67, Name: junos:HTTP, Pkts-Rcvd: 15383, Avg-Pkt-Loss(%): 0, Avg-Ingress-Jitter(us): 73, Out-of-seq-drop: 15383
Path Information:
Dst-IP Pkts-Rcvd Pkt-Loss(%) Ingress-Jitter(us) Reduction-Pkt-Loss(%) Reduction-Ingress-Jitter(us)
40.1.1.1 15384 0 69 0 -4
41.1.1.1 14939 0 62 0 -11
42.1.1.1 443 0 111 0 38
Id: 198, Name: junos:SSH, Pkts-Rcvd: 28, Avg-Pkt-Loss(%): 0, Avg-Ingress-Jitter(us): 178, Out-of-seq-drop: 28
Path Information:
Dst-IP Pkts-Rcvd Pkt-Loss(%) Ingress-Jitter(us) Reduction-Pkt-Loss(%) Reduction-Ingress-Jitter(us)
40.1.1.1 28 0 265 0 87
41.1.1.1 28 0 253 0 75
Receiver Cosq Groups Information:
Total receiver cosq's: 1
Id: 0, Name: CosQ-0, Pkts-Rcvd: 15411, Avg-Pkt-Loss(%): 0, Avg-Ingress-Jitter(us): 73, Out-of-seq-drop: 15411
Path Information:
Dst-IP Pkts-Rcvd Pkt-Loss(%) Ingress-Jitter(us) Reduction-Pkt-Loss(%) Reduction-Ingress-Jitter(us)
40.1.1.1 15412 0 69 0 -4
41.1.1.1 14967 0 255 0 182
42.1.1.1 443 0 111 0 38
Release Information
Command introduced in Junos OS Release 15.1X49-D160.