show redundant-power-system power-supply

Syntax

Description

Display information about the power supplies installed in the Redundant Power System (RPS). After installing a power supply, we recommend that you use this command to be sure that the power supply installed correctly.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show redundant-power-system power-supply command. Output fields are listed in the approximate order in which they appear.

Table 1: show redundant-power-system power-supply Output Fields
Field Name	Field Description	Level of Output
RPS	Serial number of the RPS.	All levels
PSU Slot	Number of the power supply slot. Slots are numbered 1 through 3.	All levels
Status	Status of the power supply slots: Present—The slot contains an RPS power supply. Empty—The slot is empty.	All levels
Description	Description of the RPS power supply installed in the slot.	All levels

Sample Output

show redundant-power-system power-supply (Standalone Switch)
show redundant-power-system power-supply (EX3300 Virtual Chassis)

show redundant-power-system power-supply (Standalone Switch)

show redundant-power-system power-supply (EX3300 Virtual Chassis)

Release Information

Command introduced in Junos OS Release 12.1.

ON THIS PAGE