show pfe filter hw
Syntax
show pfe filter hw
Description
Show filter information from hardware.
This command is supported on the QFX5130 and QFX5700.
Options
None
Required Privilege Level
view
Output Fields
Table 1 describes the output fields for the show pfe filter hw command.
Output fields are listed in the approximate order in which they appear.
|
Field Name |
Field Description |
|---|---|
|
|
The following filter groups are listed:
|
|
|
The specific hardware forwarding pipeline where the filter is evaluated. |
|
|
Internal identification number of the filter group. |
|
|
The hardware forwarding pipeline stage where the filter is evaluated:
|
|
|
Single or double TCAM slice or key. A double slice or key takes up more resources. |
|
|
Internally-assigned priority. Higher value denotes higher priority. |
|
|
Number of TCAM filter entries allocated to the filter group. |
|
|
Number of TCAM filter entries available for use by the filter group. |
Sample Output
> show pfe filter hw SENT: Ukern command: show evo-pfemand filter tcam-layout format hide-internal-groups Free Entries represent max uni-dimensional availability considering free TCAM banks --------------------------------------------------------------------------------------------- Group Pipe Group FP Group Group Current Free Name No Id Stage Mode Priority Entries Entries --------------------------------------------------------------------------------------------- IfpGbpPolicy 0 21 IFP Single 18 xx xx IfpGbpPolicy 1 22 IFP Single 18 xx xx IfpGbpPolicy 2 23 IFP Single 18 xx xx IfpGbpPolicy 3 24 IFP Single 18 xx xx GbpDstIpTag 0 50331649 EM Double 17 xx xx GbpSrcIpTag 0 50331653 EM Double 16 xx xx GbpDstMacTag 0 50331657 EM Single 15 xx xx GbpSrcMacTag 0 50331661 EM Single 14 xx xx
Release Information
Command introduced in Junos OS Evolved Release 25.2X100-D30.