Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


show mpls correlation nexthop-id



Display the correlation information for the Multiprotocol Label Switching (MPLS) label-switched path (LSP) with the owner of the next-hop ID.



Display information about the specified next-hop ID.


(Optional) Display the LSP descriptions. To view this information, you must configure the description statement at the [edit protocol mpls lsp] hierarchy level. Only the LSPs with a description are displayed. This command is only valid for the ingress routing device, because the description is not propagated in RSVP messages.

logical-system (all | logical-system-name)

(Optional) Perform this operation on all logical systems or on a particular logical system.

Required Privilege Level


Output Fields

Table 1 describes the output fields for the show mpls correlation nexthop-id command. Output fields are listed in the approximate order in which they appear.

Table 1: show mpls correlation nexthop-id Output Fields

Field Name

Field Description

LSP name

Name of the LSP associated with the specified next-hop ID.

Sample Output

show mpls correlation nexthop-id

Release Information

Command introduced in Junos OS Release 16.1 .