show mld snooping membership

VLAN

Name of the VLAN.

All

Interfaces

Interfaces that are members of the listed multicast group.

brief

Tag

Numerical identifier of the VLAN.

detail

Router interfaces

List of information about multicast-router interfaces:

• Name of the multicast-router interface.

• static or dynamic—Whether the multicast-router interface has been statically configured or dynamically learned.

• Uptime—For static interfaces, amount of time since the interface was configured as a multicast-router interface or since the interface last flapped. For dynamic interfaces, amount of time since the first query was received on the interface or since the interface last flapped.

• timeout—Seconds remaining before a dynamic multicast-router interface times out.

detail

Group

IP multicast address of the multicast group.

The following information is provided for the multicast group:

• Name of the interface belonging to the multicast group.

• Timeout—Time (in seconds) left until a dynamically learned interface is removed from the multicast group if no MLD membership reports are received on the interface. This counter is reset to its maximum value when a membership report is received.

• Flags—The lowest MLD version in use by a host that is a member of the group on the interface.

  If the flag static is included, the interface has been configured as static member of the multicast group.

• Receiver count—Number of hosts on the interface that are members of the multicast group. This field appears only if immediate-leave is configured on the VLAN.

• Last reporter—Last host to report membership for the multicast group.

• Include source—Multicast source addresses from all MLDv2 membership reports received for the group on the interface.

detail