show interfaces routing
Syntax
show interfaces routing <brief | summary | detail> <interface-name> <logical-system (all | logical-system-name)>
Description
Display the state of the router's interfaces. Use this command for performing router diagnostics only, when you are determining whether the routing protocols and the Junos OS differ about the state of an interface.
Options
| none | Display standard information about the state of all router interfaces on all logical systems. |
| brief | summary | detail | (Optional) Display the specified level of output. |
| interface-name | (Optional) Name of a specific interface. |
| logical-system (all | logical-system-name) | (Optional) Perform this operation on all logical systems or on a particular logical system. |
Additional Information
For information about related operational mode commands for routing instances and protocols, see the CLI Explorer.
Required Privilege Level
view
Output Fields
Table 1 lists the output fields for the show interfaces routing command. Output fields are listed in the approximate order in which
they appear.
Field Name |
Field Description |
Level of Output |
|---|---|---|
|
Name of the physical interface. |
none |
|
State of the physical interface: |
none |
|
Protocols and addresses configured on the interface. |
none |
|
Interface index number, which reflects its initialization sequence. |
|
|
Number of references to the interface in the routing software. |
|
|
State ( |
|
|
Reflects one or more of the following recent changes to the interface:
|
|
|
Number of times the interface has
gone from |
|
|
Describes the link layer of the interface. |
|
|
Encapsulation on the interface. |
|
|
Speed at which the interface is running. |
|
|
Information about the configuration of protocols on the interface:
|
|
Sample Output
- show interfaces routing brief
- show interfaces routing brief (TX Matrix Plus Router)
- show interfaces routing detail
- show interfaces routing detail (TX Matrix Plus Router)
show interfaces routing brief
user@host> show interfaces routing brief
Interface State Addresses
so-5/0/3.0 Down ISO enabled
so-5/0/2.0 Up MPLS enabled
ISO enabled
INET 192.168.2.120
INET enabled
so-5/0/1.0 Up MPLS enabled
ISO enabled
INET 192.168.2.130
INET enabled
at-1/0/0.3 Up CCC enabled
at-1/0/0.2 Up CCC enabled
at-1/0/0.0 Up ISO enabled
INET 192.168.90.10
INET enabled
lo0.0 Up ISO 47.0005.80ff.f800.0000.0108.0001.1921.6800.5061.00
ISO enabled
INET 127.0.0.1
fxp1.0 Up
fxp0.0 Up INET 192.168.6.90
show interfaces routing brief (TX Matrix Plus Router)
user@host> show interfaces routing brief
Interface State Addresses
...
ge-23/0/4.0 Up INET 203.0.113.91
ISO enabled
MPLS enabled
ge-23/0/3.0 Up INET 203.0.113.81
ISO enabled
MPLS enabled
ge-23/0/2.0 Up INET 203.0.113.71
ISO enabled
MPLS enabled
ge-23/0/1.0 Up INET 203.0.113.61
ISO enabled
MPLS enabled
ge-23/0/0.0 Up INET 203.0.113.51
ISO enabled
MPLS enabled
ge-31/0/7.599 Up INET 192.0.2.93
ge-31/0/7.598 Up INET 192.0.2.89
ge-31/0/7.597 Up INET 192.0.2.85
ge-31/0/7.596 Up INET 192.0.2.81
ge-31/0/7.595 Up INET 192.0.2.77
ge-31/0/7.594 Up INET 192.0.2.73
...
ixgbe1.0 Up INET 203.0.113.34
INET 198.51.100.4
INET6 fe80::200:1ff:fe22:4
INET6 fec0::a:22:0:4
ixgbe0.0 Up INET 203.0.113.34
INET 198.51.100
INET6 fe80::200:ff:fe22:4
INET6 fec0::a:22:0:4
em0.0 Up INET 192.168.178.11show interfaces routing detail
user@host> show interfaces routing detail
so-5/0/3.0
Index: 15, Refcount: 2, State: Up <Broadcast PointToPoint Multicast> Change:<>
Metric: 0, Up/down transitions: 0, Full-duplex
Link layer: HDLC serial line Encapsulation: PPP Bandwidth: 155Mbps
ISO address (null)
State: <Broadcast PointToPoint Multicast> Change: <>
Preference: 0 (120 down), Metric: 0, MTU: 4470 bytes
so-5/0/2.0
Index: 14, Refcount: 7, State: <Up Broadcast PointToPoint Multicast> Change:<>
Metric: 0, Up/down transitions: 0, Full-duplex
Link layer: HDLC serial line Encapsulation: PPP Bandwidth: 155Mbps
MPLS address (null)
State: <Up Broadcast PointToPoint Multicast> Change: <>
Preference: 0 (120 down), Metric: 0, MTU: 4458 bytes
ISO address (null)
State: <Up Broadcast PointToPoint Multicast> Change: <>
Preference: 0 (120 down), Metric: 0, MTU: 4470 bytes
INET address 192.168.2.120
State: <Up Broadcast PointToPoint Multicast Localup> Change: <>
Preference: 0 (120 down), Metric: 0, MTU: 4470 bytes
Local address: 192.168.2.120
Destination: 192.168.2.110/32
INET address (null)
State: <Up Broadcast PointToPoint Multicast> Change: <>
Preference: 0 (120 down), Metric: 0, MTU: 4470 bytes
...
show interfaces routing detail (TX Matrix Plus Router)
user@host> show interfaces routing detail
ge-23/0/4.0
Index: 77, Refcount: 5, State: <Up Broadcast Multicast> Change: <>
0 metric, 0 up/down transitions, reth state 0, full-duplex
Link layer: Ethernet Encapsulation: Ethernet Bandwidth: 1000Mbps
Link address #0 0.1d.b5.14.da.2d
INET address 203.0.113.91
State: <Up Broadcast Multicast Localup> Change: <> Flags: <RT-Change>
Preference 0, metric 0, MTU 1500 bytes
Broadcast address 203.0.113.93
Destination: 203.0.113.0/30
System flags: <Is-Preferred Is-Primary>
ISO address (null)
State: <Up Broadcast Multicast Localup> Change: <> Flags: <>
Preference 0, metric 0, MTU 1497 bytes
System flags: <>
MPLS address (null)
State: <Up Broadcast Multicast Localup> Change: <> Flags: <>
Preference 0, metric 0, MTU 1488 bytes
System flags: <>
ge-23/0/3.0
Index: 76, Refcount: 5, State: <Up Broadcast Multicast> Change: <>
0 metric, 0 up/down transitions, reth state 0, full-duplex
Link layer: Ethernet Encapsulation: Ethernet Bandwidth: 1000Mbps
Link address #0 0.1d.b5.14.da.2c
INET address 203.0.113.81
State: <Up Broadcast Multicast Localup> Change: <> Flags: <RT-Change>
Preference 0, metric 0, MTU 1500 bytes
Broadcast address 10.8.1.3
Destination: 203.0.113.80/30
System flags: <Is-Preferred Is-Primary>
ISO address (null)
State: <Up Broadcast Multicast Localup> Change: <> Flags: <>
Preference 0, metric 0, MTU 1497 bytes
System flags: <>
MPLS address (null)
State: <Up Broadcast Multicast Localup> Change: <> Flags: <>
Preference 0, metric 0, MTU 1488 bytes
System flags: <>
ge-23/0/2.0
Index: 75, Refcount: 5, State: <Up Broadcast Multicast> Change: <>
0 metric, 0 up/down transitions, reth state 0, full-duplex
Link layer: Ethernet Encapsulation: Ethernet Bandwidth: 1000Mbps
Link address #0 0.1d.b5.14.da.2b
INET address 203.0.113.71
State: <Up Broadcast Multicast Localup> Change: <> Flags: <RT-Change>
Preference 0, metric 0, MTU 1500 bytes
Broadcast address 203.0.113.73
Destination: 203.0.113.70/30
System flags: <Is-Preferred Is-Primary>
ISO address (null)
State: <Up Broadcast Multicast Localup> Change: <> Flags: <>
Preference 0, metric 0, MTU 1497 bytes
System flags: <>
MPLS address (null)
State: <Up Broadcast Multicast Localup> Change: <> Flags: <>
Preference 0, metric 0, MTU 1488 bytes
System flags: <>
ge-23/0/1.0
Index: 74, Refcount: 5, State: <Up Broadcast Multicast> Change: <>
0 metric, 0 up/down transitions, reth state 0, full-duplex
Link layer: Ethernet Encapsulation: Ethernet Bandwidth: 1000Mbps
Link address #0 0.1d.b5.14.da.2a
INET address 203.0.113.61
State: <Up Broadcast Multicast Localup> Change: <> Flags: <RT-Change>
Preference 0, metric 0, MTU 1500 bytes
Broadcast address 203.0.113.63
...
ixgbe1.0
Index: 5, Refcount: 5, State: <Up Broadcast Multicast> Change: <>
0 metric, 0 up/down transitions, reth state 0, full-duplex
Link layer: Ethernet Encapsulation: Ethernet Bandwidth: 1000Mbps
Link address #0 2.0.1.22.0.4
INET address 203.0.113.34
State: <Up Broadcast Multicast Localup> Change: <> Flags: <>
Preference 0, metric 0, MTU 1500 bytes
Broadcast address 203.0.113.255
Destination: 203.0.113.0/8
System flags: <Is-Preferred>
INET address 198.51.100.4
State: <Up Broadcast Multicast Localup> Change: <> Flags: <>
Preference 0, metric 0, MTU 1500 bytes
Broadcast address 191.255.255.255
Destination: 192.0.2.0/2
System flags: <Primary Is-Preferred Is-Primary>
INET6 address fe80::200:1ff:fe22:4
State: <Up Broadcast Multicast Localup> Change: <> Flags: <>
Preference 0, metric 0, MTU 1500 bytes
Destination: fe80::/64
System flags: <Is-Preferred>
INET6 address fec0::a:22:0:4
State: <Up Broadcast Multicast Localup> Change: <> Flags: <>
Preference 0, metric 0, MTU 1500 bytes
Destination: fec0::/64
System flags: <Is-Preferred Is-Primary>
ixgbe0.0
Index: 4, Refcount: 5, State: <Up Broadcast Multicast> Change: <>
0 metric, 0 up/down transitions, reth state 0, full-duplex
Link layer: Ethernet Encapsulation: Ethernet Bandwidth: 1000Mbps
Link address #0 2.0.0.22.0.4
INET address 203.0.113.34
State: <Up Broadcast Multicast Localup> Change: <> Flags: <>
Preference 0, metric 0, MTU 1500 bytes
Broadcast address 203.0.113.255
Destination: 203.0.113.0/8
System flags: <Is-Preferred>
INET address 198.51.100.4
State: <Up Broadcast Multicast Localup> Change: <> Flags: <>
Preference 0, metric 0, MTU 1500 bytes
Broadcast address 191.255.255.255
Destination: 192.0.2.0/2
System flags: <Primary Is-Default Is-Preferred Is-Primary>
INET6 address fe80::200:ff:fe22:4
State: <Up Broadcast Multicast Localup> Change: <> Flags: <>
Preference 0, metric 0, MTU 1500 bytes
Destination: fe80::/64
System flags: <Is-Preferred>
INET6 address fec0::a:22:0:4
State: <Up Broadcast Multicast Localup> Change: <> Flags: <>
Preference 0, metric 0, MTU 1500 bytes
Destination: fec0::/64
System flags: <Is-Default Is-Preferred Is-Primary>
em0.0
Index: 3, Refcount: 2, State: <Up Broadcast Multicast> Change: <>
0 metric, 0 up/down transitions, reth state 0, full-duplex
Link layer: Ethernet Encapsulation: Ethernet Bandwidth: 100Mbps
Link address #0 0.80.f9.26.0.c0
INET address 192.168.178.11
State: <Up Broadcast Multicast Localup> Change: <> Flags: <>
Preference 0, metric 0, MTU 1500 bytes
Broadcast address 192.168.178.127
Destination: 192.168.178.0/25
System flags: <Is-Preferred Is-Primary>Release Information
Command introduced before Junos OS Release 7.4.