show firewall prefix-action-stats

Syntax (filter-specific mode)

Syntax (term-specific mode)

Description

Display prefix action statistics about configured firewall filters.

If you clear statistics for firewall filters that are applied to MPCs and that also use the prefix-action action on matched packets, wait at least 5 seconds before you enter the show firewall prefix-action-stats command. A 5-second pause between issuing the clear firewall and show firewall prefix-action-stats commands avoids a possible timeout of the show firewall prefix-action-stats command.

By default, policers operate in term-specific mode.

See Filter-Specific Policer Overview for information about how to configure policers in filter-specific mode.

Options

filter `filter-name`	Name of a filter.
prefix-action `prefix-action-name`	Name of a prefix action.
from `number` to `number`	(Optional) Starting and ending counter or policer.
logical-system (`logical-system-name` \| all)	(Optional) Perform this operation on all logical systems or on a particular system.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show firewall prefix-action-stats command. Output fields are listed in the approximate order in which they appear.

Table 1: show firewall prefix-action-stats Output Fields
Field Name	Field Description
`Filter`	Filter name. Filters configured for logical systems include the name of the filter prefixed with the two underscore characters (__) and the name of the logical system (for example, `__ls1/filter1`).

Sample Output

The following sample output assumes that the policer act1 is in term mode and that there is a term named term1 configured in the firewall filter test.