show fabric administration inventory

Item

Type of QFabric system component being viewed. Possible values include Node group, Interconnect device, Fabric control, Fabric manager, Diagnostic routing engine, Director group, and Ungrouped Node device.

Identifier

Hardware serial identifier of a QFabric system component. When you configure an alias name for a component, the ID is displayed.

Connection

Status of a QFabric system component: either Connected or Disconnected, depending on whether or not the Director software has detected keepalive messages for the listed component.

Configuration

Whether or not the configuration for a QFabric system component has been received and installed. The configuration can be Configured, Failed (with details about the failure), Pending (in the process of being written or retried), or Unknown.

Node group

Name of the Node groups associated with the QFabric system, and the Node devices assigned to each Node group. The group can be either Connected or Disconnected, depending on whether or not the Director software has detected keepalive messages for the devices in the group. This field also displays the serial ID for the Node group and the status for the Node group.

Interconnect device

Name of the Interconnect devices associated with the Node group. The device can be either Connected or Disconnected, depending on whether or not the Director software has detected keepalive messages for the device. This field also displays the serial ID and configuration status for the Interconnect device.

Fabric manager

Name of the primary virtual Junos Routing Engine associated with the QFabric system. The fabric manager Routing Engine can be either Connected or Disconnected, depending on whether or not the Director software has detected keepalive messages for this virtual device. It also displays the identifier and configuration status for the fabric manager Routing Engine.

Fabric control

Name of the virtual Junos Routing Engines responsible for route selection within a QFabric system partition. The fabric control Routing Engine can be either Connected or Disconnected, depending on whether or not the Director software has detected keepalive messages for this virtual device. It also displays the identifier and configuration status for the fabric control Routing Engine.

Diagnostic routing engine

Name of the virtual Junos Routing Engine responsible for troubleshooting and diagnostic utilities within a QFabric system partition. The diagnostic Routing Engine can be either Connected or Disconnected, depending on whether or not the Director software has detected keepalive messages for this virtual device. It also displays the identifier and configuration status for the diagnostic Routing Engine.

Director group

Identifier for the Director devices that are part of the Director group in a QFabric system. Each Director device can be either Connected or Disconnected, depending on whether or not the Director software has detected keepalive messages for the device.

Connection uptime

Length of time the component has been operational. The time is listed in days, hours, minutes, and seconds (D+HH:MM:SS).

Network domain

Indicates whether a Node group is a network Node group (Yes) or a server Node group (No).

Member id

Member identification number for a Node device within a Node group.

Node group master

Indicates whether or not a Node device acts as a primary device within a Node group. Values for this field are Yes or No.

Configuration checkout failed

Provides troubleshooting details about a failed configuration on a component. This field includes the following output:

• Edit path—Displays the configuration hierarchy level where the problem occurs.

• Statement—Displays the configuration statement that causes the problem.

• Message—Provides a suggested workaround to resolve the problem.

Member

Name of a Routing Engine allocated to an Interconnect device.

Master

Indicates whether or not a Routing Engine acts as a primary device within an Interconnect device. Values are Yes or No.

Total Node devices

Number of connected and disconnected Node devices in the QFabric system.

Total connected Node devices

Number of available Node devices in the QFabric system.

Total disconnected Node devices

Number of unavailable Node devices in the QFabric system.

Total Interconnect devices

Number of Interconnect devices in the QFabric system.