show chassis device-mode

Syntax

Description

Display information about the operating mode of the device. For example, QFX3500 devices operate either as a single switch in standalone mode or as a QFabric system Node device in node-device mode.

Note:

Issue the show chassis device-mode command only when your management station is connected directly to the device over a console port connection.

Options

There are no options for this command.

Required Privilege Level

admin

Output Fields

Table 1 lists the output fields for the show chassis device-mode command. Output fields are listed in the approximate order in which they appear.

Table 1: show chassis device-mode Output Fields
Field Name	Field Description
Current device-mode	Existing operational mode for the device. The device can be in Interconnect device mode, Node device mode, or standalone mode.
Future device-mode after reboot	Future operational mode for the device after you reboot it. The device can be set to enter Interconnect device mode, Node device mode, or standalone mode. Note: To set the future mode of the device, issue the `request chassis device-mode` command.

Sample Output

show chassis device-mode (Interconnect Device Mode)
show chassis device-mode (Interconnect Device Mode, but Node Device-Ready)
show chassis device-mode (Interconnect Device Mode, but Standalone-Ready)
show chassis device-mode (Node Device Mode)
show chassis device-mode (Node Device Mode, but Interconnect Device-Ready)
show chassis device-mode (Node Device Mode, but Standalone-Ready)
show chassis device-mode (Standalone Mode)
show chassis device-mode (Standalone Mode, but Interconnect Device-Ready)
show chassis device-mode (Standalone Mode, but Node Device-Ready)