request vmhost zeroize ztp-option secure
Syntax
request vmhost zeroize ztp-option secure-(enable | disable)
Description
On secure platforms that run secure ZTP (SZTP), you can switch between using SZTP to using zero-touch provisioning (ZTP).
On MX304 devices without a backup Routing
Engine, when you issue the request vmhost zeroize ztp-option
secure-(enable | disable) command, you will see the following
warning on the console: Backup RE is not present. Zeroize backup RE when
it is inserted.
Options
| enable |
The CLI checks to see if the device is a secure device. If the device is secure, the process ends. The next time the device boots, the device uses secure ZTP as the provisioning solution. If the device is not a secure device, you will receive an error message that says the device is not secure, and the process ends. |
| disable | The CLI checks to see if the device is a secure device. If the device is a secure device, the next time the device boots, the device uses ZTP as the provisioning solution. If the device is not secure, the process ends. |
Required Privilege Level
maintenance
Sample Output
request vmhost zeroize ztp-option-enable
user@device> request vmhost zeroize ztp-option secure-enable
request vmhost zeroize ztp-option secure-disable
user@device> request vmhost zeroize ztp-option secure-disable
Release Information
Command introduced in Junos OS Release 23.4R1.