request system firmware reload (Junos OS Evolved)

Syntax

Description

Note:

Use extreme caution when using this command. You can cause significant damage to your configuration if you use this command incorrectly.

Use this command to reload firmware after you issue the request system firmware upgrade operational mode command. Requesting a firmware reload avoids having to power cycle the line card or SIB after you perform a firmware upgrade.

The target FPC or SIB must be offline for the reload firmware command to take effect.

Options

fpc slot slot-number	Reload FPC firmware. slot slot-number—Specify the particular FPC slot (0-7) that should reload its firmware.
sib slot slot-number	Reload SIB firmware. slot slot-number—Specify the particular SIB slot (0-5) that should reload its firmware.

Required Privilege Level

maintenance

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Release Information

Command introduced in Junos OS Evolved Release 21.4R1 for the PTX Series routers with the LC1201 and LC1202 line cards.