Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


clear security flow session application-traffic-control



Clear all application traffic control sessions or the session associated with the specified option.

Application traffic control enables application-aware quality of service, as specified in the rules of the rules set defined for it.



Name of the application or application set.

  • dns—Domain Name System

  • ftp—File Transfer Protocol

  • ignore—Ignore application type

  • mgcp-ca—Media Gateway Control Protocol with Call Agent

  • mgcp-ua—MGCP with User Agent

  • ms-rpc—Microsoft RPC

  • pptp—Point-to-Point Tunneling Protocol

  • q931—ISDN connection control protocol

  • ras—RAS

  • realaudio—RealAudio

  • rsh—UNIX remote shell services

  • rtsp—Real-Time Streaming Protocol

  • sccp—Skinny Client Control Protocol

  • sip—Session Initiation Protocol

  • sqlnet-v2—Oracle SQLNET

  • sun-rpc—Sun Microsystems RPC

  • talk—TALK program

  • tftp—Trivial File Transfer Protocol

To display the supported applications list on an SRX Series device, enter the following command from configuration mode:


A 32-bit connection tag that uniquely identifies the GPRS tunneling protocol, user plane (GTP-U), and the Stream Control Transmission Protocol (STCP) sessions.

The connection tag for GTP-U is the tunnel endpoint identifier (TEID). For SCTP, it is the vTag. The connection ID remains 0 if the connection tag is not used by the sessions.

  • Range: 0 through 4294967295


Destination port.

  • Range: 1 through 65535.


Destination IP prefix or address.


Protocol family:

  • inet—Clear IPv4 sessions.

  • inet6–Clear IPv6 sessions.


Name of incoming or outgoing interface.


IP protocol number.


Source port.

  • Range: 1 through 65535.


Source IP prefix or address.

Required Privilege Level


Output Fields

When you enter this command, you are provided feedback on the status of your request.

The same output is displayed when you enter an option for this command.

Sample Output


Release Information

Command introduced in Junos OS Release 11.4.