smart-check
Syntax
smart-check {
ssd-series ssd-series-name {
id id-num {
id-threshold id-threshold-value;
id-value (norm | raw);
id-flag (high | low);
}
}
}
Hierarchy Level
[edit chassis routing-engine disk]
Description
Configure the device to perform health
monitoring on the Routing Engine disk and raise alarm when an error
occurs. You can specify threshold value for each smart attribute of
the solid-state drive (SSD). The device raises an alarm when the threshold
is breached. You can view the alarms by using the command show
chassis alarms.
Options
| disk | Configure health check parameters for the SSD. |
| ssd-series ssd-series-name | Specify the SSD series name. |
| id id-num | Specify the ID of the SSD smart attribute for which you are
configuring the health check. You can view the smart attributes and
their IDs of an SSD by using the command
|
| id-threshold | Specify the SSD smart attribute threshold, breaching which will result in the device logging a health event or raising an alarm. |
| id-value | Choose the attribute value type from the following options:
|
| id-flag | Choose the attribute value flag from the following options:
|
| smart-check |
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 19.2R1.