Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

show chassis craft-interface

Syntax (MX Series Routers)

Syntax (MX104, MX2010, MX2020, MX2008, and ACX Series routers.)

Syntax (TX Matrix Routers)

Syntax (TX Matrix Plus Routers)

Description

For routers or switches that have a display on the craft interface, show the messages that are currently displayed. On all routers except for the M20 router, you must enter this command on the primary Routing Engine.

Options

none

(TX Matrix, TX Matrix Plus routers, MX104, MX2010, MX2020, and MX2008 routers, and ACX Series routers only) On a TX Matrix router, show messages that are currently displayed on the craft interface on the TX Matrix router and its attached T640 routers. On a TX Matrix Plus router, show messages that are currently displayed on the craft interface on the TX Matrix Plus router and its attached routers.

all-members

(MX Series routers only) (Optional) Display information currently on the craft interface for all members of the Virtual Chassis configuration.

lcc number

(TX Matrix, TX Matrix Plus routers only) (Optional) On a TX Matrix router, show messages that are currently displayed on the craft interface for a specified T640 router (line-card chassis) that is connected to the TX Matrix router. On a TX Matrix Plus router, show messages that are currently displayed on the craft interface for a specified router (line-card chassis) that is connected to the TX Matrix Plus router.

Replace number with the following values depending on the LCC configuration:

  • 0 through 3, when T640 routers are connected to a TX Matrix router in a routing matrix.

  • 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a routing matrix.

  • 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.

  • 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.

local

(MX Series routers only) (Optional) Display information currently on the craft interface for the local Virtual Chassis member.

member member-id

(MX Series routers only) (Optional) Display information currently on the craft interface for the specified member of the Virtual Chassis configuration. For an MX Series Virtual Chassis, replace member-id with a value of 0 or 1.

scc

(TX Matrix router only) (Optional) Show messages that are currently displayed on the craft interface for the TX Matrix router (switch-card chassis).

sfc number

(TX Matrix Plus router only) (Optional) Show messages that are currently displayed on the craft interface for the respective TX Matrix Plus router (switch-fabric chassis). Replace number variable with 0.

Required Privilege Level

view

Output Fields

Table 1 lists the output fields for the show chassis craft-interface command. Output fields are listed in the approximate order in which they appear.

Table 1: show chassis craft-interface Output Fields

Field Name

Field Description

LCD screen

or

FPM Display Contents

Contents of the Front Panel Module display:

  • router-name—Name of the router.

  • Up—How long the router has been operational, in days, hours, minutes, and seconds.

  • message—Information about the router traffic load, the power supply status, the fan status, and the temperature status. The display of this information changes every 2 seconds. If a text message has been created with the set chassis display command, this message appears on all four lines of the craft interface display. The display alternates between the text message and the standard system status messages every 2 seconds.

SFC Front Panel Switch Settings

(TX Matrix Plus Routers)—Display the SFC front panel switch settings:

SFC Chassis Number and Config Size are settings on physical switches located on the left side of the craft interface of the TX Matrix Plus router.

  • SFC Chassis Number—This field always displays the value 00.

  • Config Size—The value of this field is 0 for the TX Matrix Plus router. The value of this filed is 3 for TX Matrix Plus router with 3D SIBs.

Front Panel System LEDs

(MX104, MX2010, MX2020, and MX2008 Routers) Status of the Front Panel System LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit.

Front Panel Alarm Indicators

(MX104, MX2010, MX2020, and MX2008 Routers) Status of the Front Panel Alarm indicators. A dot (.) indicates the relay is off. An asterisk (*) indicates the relay is active.

Input Relay

Status of the configured input relay ports—0 through 3. The mode is normally open or closed. The status is clear or raised.

Output Relay

Status of the configured output ports—0 or 1. The mode is normally open or closed. The status is clear or raised.

Front Panel FPC LEDs

(MX2010, MX2020, and MX2008 Routers) Status of the Front Panel Flexible PIC Concentrator (FPC) LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit. On MX2010 and MX2008 routers, there are 10 (0-9) FPCs LEDs. On MX2020 routers, there are 20 (0-9 and 10-19) FPCs LEDs.

CB LEDs

Status of the Control Board (CB) LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit.

PS LEDs

(MX2010, MX2020, and MX2008 Routers) Status of the Power Supply (PS) LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit. On MX2010 and MX2008 routers, there are 9 (0-8) PS LEDs. On MX2020 routers, there are 18 (0-8 and 9-17) PS LEDs.

PS Status

(MX104 Routers) Status of the Power Supply (PS). Green indicates that the power supply is functioning. Red indicates that the power supply is not functioning. A dot (.) indicates the LED is not lit. An asterix (*) indicates the LED is lit.

FAN Tray LEDs

(MX2010, MX2020, and MX2008 Routers) Status of the Fan Tray LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit.

Front Panel SFB LEDs

(MX2010, MX2020, and MX2008 Routers) Status of the Front Panel Switch Fabric Boards (SFB) LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit.

Front Panel Chassis Info

(MX2010, MX2020, and MX2008 Routers) Information about the chassis such as the chassis number and role. User can set the chassis number in multi-chassis configurations.

MCS and SFM LEDs

Status of the Miscellaneous Control Subsystem (MCS) and Switching and Forwarding Module (SFM) LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit. When neither a dot nor an asterisk is displayed, there is no board in that slot.

SIB LEDs

Status of the Switch Interface Board (SIB) LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit.

SCG LEDs

Status of the SONET Clock Generator (SCG) LEDs. A dot (.) indicates the LED is not lit. An asterisk (*) indicates the LED is lit.

Sample Output

show chassis craft-interface (M20 Router)

show chassis craft-interface (M40 Router)

show chassis craft-interface (M120 Router)

show chassis craft-interface (M160 Router)

show chassis craft-interface (MX150)

show chassis craft-interface (MX104 Router)

show chassis craft-interface (MX2010 Router)

show chassis craft-interface (MX2020 Router)

show chassis craft-interface (MX2008 Router)

show chassis craft-interface (T4000 Router)

show chassis craft-interface (TX Matrix Routing Matrix)

show chassis craft-interface (TX Matrix Plus Routing Matrix)

show chassis craft-interface (TX Matrix Plus router with 3D SIBs)

show chassis craft-interface (ACX2000 Universal Metro Router)

show chassis craft-interface (ACX500 Router)

Release Information

Command introduced before Junos OS Release 7.4.

sfc option for the TX Matrix Plus router introduced in Junos OS Release 9.6.