show chassis ethernet-switch
Syntax
show chassis ethernet-switch <errors> <statistics>
Description
Display information about the ports on the Control Board (CB) Ethernet switch and accumulated Ethernet switch errors on an SRX Series Firewall.
Required Privilege Level
view
Output Fields
Table 1 lists the output fields for the show chassis ethernet-switch command. Output fields are listed in the approximate order in which they appear.
Field Name |
Field Description |
|---|---|
Link is good on port n connected to device or Link is good on Fast Ethernet port n connected to device |
Information about the link between each port on the CB's Ethernet switch and one of the following devices:
|
Speed is |
Speed at which the Ethernet link is running. |
Duplex is |
Duplex type of the Ethernet link: full or half. |
Autonegotiate is Enabled (or Disabled) |
By default, built-in Fast Ethernet ports on a PIC autonegotiate whether to operate at 10 Mbps or 100 Mbps. All other interfaces automatically choose the correct speed based on the PIC type and whether the PIC is configured to operate in multiplexed mode. |
Sample Output
show chassis ethernet-switch
user@host> show chassis ethernet-switch node0: -------------------------------------------------------------------------- Displaying summary for switch 0 Link is good on GE port 0 connected to device: FPC0 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is good on GE port 1 connected to device: FPC1 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is good on GE port 2 connected to device: FPC2 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is good on GE port 3 connected to device: FPC3 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is good on GE port 4 connected to device: FPC4 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is down on GE port 5 connected to device: FPC5 Link is down on GE port 6 connected to device: FPC6 Link is good on GE port 7 connected to device: FPC7 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is good on GE port 8 connected to device: FPC8 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is good on GE port 9 connected to device: FPC9 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is down on GE port 10 connected to device: FPC10 Link is down on GE port 11 connected to device: FPC11 Link is good on GE port 12 connected to device: Other RE Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is good on GE port 13 connected to device: RE-GigE Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is down on GE port 14 connected to device: Debug-GigE node1: -------------------------------------------------------------------------- Displaying summary for switch 0 Link is good on GE port 0 connected to device: FPC0 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is good on GE port 1 connected to device: FPC1 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is good on GE port 2 connected to device: FPC2 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is good on GE port 3 connected to device: FPC3 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is good on GE port 4 connected to device: FPC4 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is down on GE port 5 connected to device: FPC5 Link is down on GE port 6 connected to device: FPC6 Link is good on GE port 7 connected to device: FPC7 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is good on GE port 8 connected to device: FPC8 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is good on GE port 9 connected to device: FPC9 Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is down on GE port 10 connected to device: FPC10 Link is down on GE port 11 connected to device: FPC11 Link is good on GE port 12 connected to device: Other RE Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is good on GE port 13 connected to device: RE-GigE Speed is 1000Mb Duplex is full Autonegotiate is Enabled Flow Control TX is Disabled Flow Control RX is Disabled Link is down on GE port 14 connected to device: Debug-GigE
show chassis ethernet-switch errors (SRX5600)
user@host> show chassis ethernet-switch errors Displaying error for switch 0 Error count not available for port 0 connected to device FPC0 Error count not available for port 1 connected to device FPC1 Error count not available for port 2 connected to device FPC2 Error count not available for port 3 connected to device FPC3 Error count not available for port 4 connected to device FPC4 Error count not available for port 5 connected to device FPC5 Error count not available for port 6 connected to device FPC6 Error count not available for port 7 connected to device FPC7 Error count not available for port 8 connected to device FPC8 Error count not available for port 9 connected to device FPC9 Error count not available for port 10 connected to device FPC10 Error count not available for port 11 connected to device FPC11 Error count not available for port 12 connected to device Other RE Accumulated error counts for port 13 connected to device RE-GigE: MLT3 0 Lock 0 Xmit 0 ESD 0 False carrier 0 Disconnects 0 FX mode 0 Accumulated error counts for port 14 connected to device Debug-GigE: MLT3 0 Lock 0 Xmit 0 ESD 0 False carrier 0 Disconnects 0 FX mode 0 Error count not available for port 15 connected to device Nothing Error count not available for port 16 connected to device Nothing Error count not available for port 17 connected to device Debug-GigE Error count not available for port 18 connected to device Nothing Error count not available for port 19 connected to device Nothing Error count not available for port 20 connected to device Nothing Error count not available for port 21 connected to device Nothing Error count not available for port 22 connected to device Nothing Error count not available for port 23 connected to device Nothing Error count not available for port 24 connected to device External-Ethernet Error count not available for port 25 connected to device External-Ethernet Error count not available for port 26 connected to device External-Ethernet Error count not available for port 27 connected to device External-Ethernet
Release Information
Command introduced in Junos OS Release 9.2.