passive (Protocols BGP)
Syntax
passive;
Hierarchy Level
[edit logical-systems logical-system-name protocols bgp], [edit logical-systems logical-system-name protocols bgp group group-name], [edit logical-systems logical-system-name protocols bgp group group-name neighbor address], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp group group-name], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols bgp group group-name neighbor address], [edit protocols bgp], [edit protocols bgp group group-name], [edit protocols bgp group group-name neighbor address], [edit routing-instances routing-instance-name protocols bgp], [edit routing-instances routing-instance-name protocols bgp group group-name], [edit routing-instances routing-instance-name protocols bgp group group-name neighbor address]
Description
Configure the routing device so that active open messages are not sent to the peer. Once you configure the routing device to be passive, the routing device will wait for the peer to issue an open request before a message is sent.
Default
If you omit this statement, all explicitly configured peers are active, and each peer periodically sends open requests until its peer responds.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.